Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Buick Century car and truck
repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Buick Century automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Buick Century
- 2003 Buick Century Custom 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:J
- 2003 Buick Century Limited 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:J
- 2003 Buick Century 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Drum Brakes -> Type 5 -> Tightening Specifications
Vehicle: 2003 Buick Century 3.1 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Tightening Specifications
Vehicle: 2003 Buick Century Custom 3.1 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 1) -> Caliper Service -> Assemble -> Disassemble -> Replacement
Vehicle: 2003 Buick Century 3.1 V6 GAS
Replacement
- Remove 2/3 of brake fluid from master cylinder reservoir.
- Raise and support vehicle.
- Mark relationship of wheel to axle flange, then remove wheel and tire assembly.
- Using a suitable C-clamp, compress caliper piston enough for clearance.
- Remove brake hose from caliper plug openings in caliper and brake hose to prevent fluid loss and contamination.
- Remove caliper bolts, then the caliper housing from rotor and caliper bracket.
- Reverse procedure to install.
Disassemble
- Pad interior of caliper assembly with a clean shop towel, then remove piston assembly using low pressure compres...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Caliper Service -> Disassemble -> Replacement
Vehicle: 2003 Buick Century 3.1 V6 GAS
Replacement
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Push piston back into caliper bore using suitable C-clamp, Fig. .
- If caliper assembly is being removed for service, remove inlet fitting attaching bolt, copper washer, and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose since this may damage hose's internal structure. If only shoe and lining assemblies are to be replaced, do not disconnect brake line fittin...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Rotor Replacement
Vehicle: 2003 Buick Century 3.1 V6 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove caliper assembly from rotor as outlined under "Caliper Service."
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Buick Century AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Buick Century cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 1) -> Precautions
Vehicle: 2003 Buick Century Custom 3.1 V6 GAS
- Grease or any other foreign material must be kept off brake linings, caliper, surfaces of disc and external surfaces of hub during service procedures.
- Handling brake disc and caliper should be done in a way to avoid deformation of disc and nicking or scratching brake linings.
- If inspection reveals worn or damaged rubber piston seals, they should be replaced.
- During removal and installation of a wheel assembly, ensure not to interfere with or damage ca...
CLICK HERE TO GET FULL ACCESS TO 2003 Buick Century BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Buick Century vehicle.
|
| Access the Complete guide! |
