Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Dodge Stratus car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Dodge Stratus automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Dodge Stratus
- 2003 Dodge Stratus 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 2003 Dodge Stratus 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2003 Dodge Stratus 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2003 Dodge Stratus 2.7 V6 FLEX, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:T
- 2003 Dodge Stratus R/T 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Anti-lock Brakes -> Teves Anti-Lock Braking System -> System Service -> 1999 -> 1999 Neon -> 1999-2000 -> 1999-2000 Sebring Convertible & Stratus -> 2000-03 -> 2000-03 Neon -> 2001-03 -> 2001-03 Sebring Convertible, Sebring Sedan & Stratus Sedan -> Brake System Bleed -> Breeze & Cirrus -> Component Replacement -> Concorde, Intrepid, LHS & 300M -> Controller Anti-Lock Brake (CAB) -> Front -> Integrated Control Unit (ICU) -> Neon -> Rear -> Sebring Convertible, Sebring Sedan & Stratus Sedan -> Wheel Speed Sensor
Vehicle: 2003 Dodge Stratus 2.7 V6 GAS
Brake System Bleed
The TEVES Mark 20e anti-lock brake system must be bled as two independent braking systems. The non-ABS portion of the brake system should be bled the same as any non-ABS system. The ABS portion of the system requires the use of a DRB, or equivalently programmed scan tool.
- To bleed non-ABS portion of system, refer to "Hydraulic Brakes."
- To bleed the ABS portion of the system, connect DRB scan tool to vehicle diagnostics connector, located under the lefthand side of instrument panel.
- Set can tool to Bleed ABS routine.
- Apply brake pedal firmly and initiate Bleed ABS cycl...
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2003 Dodge Stratus 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Drum Brakes -> Type 2 -> Adjustments -> Parking Brake
Vehicle: 2003 Dodge Stratus R/T 3.0 V6 GAS
Parking Brake
These brakes are equipped with self adjusting mechanisms. Periodic adjustments are not required. If stopping power is insufficient, or if brake pedal travel is excessive, brakes and self adjusting mechanism should be cleaned and inspected.
After performing brake service, adjust parking brake as follows:
- Apply parking brake lever with force of approximately 45 lbs. while counting clicks. Lever should click 5-7 times.
- If not within specifications, release parking brake lever and...
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Disc Brakes -> Type 1 -> Brake System Bleed
Vehicle: 2003 Dodge Stratus 2.7 V6 GAS
Refer to "Hydraulic Brake S... "
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Disc Brakes -> Type 1 -> Caliper Service -> Overhaul -> Replacement
Vehicle: 2003 Dodge Stratus 2.4 L4 GAS
Replacement
- Remove brake pads as outlined under "Brake Pad Service."
- Disconnect brake hose at caliper strut and brake caliper, then cap brake line.
- Reverse procedure to install. Bleed brake system as outlined in "Hydraulic Brake Systems."
Overhaul
- Remove brake pads as outlined under "Brake Pad Service."
- Hang caliper on a wire away from rotor.
- Place a small piece of wood between piston and caliper fingers.
- Carefully depress brake pedal to hydraulically push piston out of bore., then apply and hold-down brake pedal to any position beyond first inch of brake travel. This will prevent master cyli...
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Dodge Stratus cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Bench Bleeding -> Manual Bleed -> Master Cylinder Bleed -> On-Vehicle Bleeding -> Pressure Bleed
Vehicle: 2003 Dodge Stratus 2.7 V6 FLEX
Pressure Bleed
Use bleeder tank tool No. C-3496-B, or equivalent, and adapter tool No. BB400-9A, or equivalent, to pressurize hydraulic system.
Normal pressure bleeder pressure should not be more than 35 psi. On models equipped with plastic reservoirs, do not exceed 25 psi bleeding pressure.
- Attach suitable clear plastic hose to bleeder screw and submerge other end into clear container with clean brake fluid.
- Open bleeder screw at least one full turn.
- Bleed 4-8 ounces of fluid through system until air free flow is maintained.
- Repeat procedure at all screws.
- If pedal travel is excess...
CLICK HERE TO GET FULL ACCESS TO 2003 Dodge Stratus BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Dodge Stratus vehicle.
|
| Access the Complete guide! |
