Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Honda Odyssey car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Honda Odyssey automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Honda Odyssey
- 2003 Honda Odyssey EX 3.5 V6 GAS, CC:3474, Fuel Injection
- 2003 Honda Odyssey LX 3.5 V6 GAS, CC:3474, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Honda Odyssey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Honda Odyssey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 Honda Odyssey EX 3.5 V6 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid, then reinstall drain plug using new washer.
- Remove lock pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using ball joint thread protector and remover.
- To avoid damaging ball joint, install ball joint thread protector onto threads of ball joint stud. Be careful not to damage ball joint boot when instal...
CLICK HERE TO GET FULL ACCESS TO 2003 Honda Odyssey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Honda Odyssey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Honda Odyssey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 Honda Odyssey LX 3.5 V6 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid, then reinstall drain plug using new washer.
- Remove lock pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using ball joint thread protector and remover.
- To avoid damaging ball joint, install ball joint thread protector onto threads of ball joint stud. Be careful not to damage ball joint boot when instal...
CLICK HERE TO GET FULL ACCESS TO 2003 Honda Odyssey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



