Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Control Unit -> ASR/ETS/ESP -> Brake System Bleed -> CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500& SL600 -> CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320 -> Component Replacement -> ESP Charging Pump -> ESP Pressurizing Piston Unit -> Front Wheel -> Hydraulic Unit -> Rear Axle -> Speed Sensor
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
Brake System Bleed
Refer to procedure as outlined in "Hydraulic Brake Systems."
Component Replacement
Hydraulic Unit
ASR/ETS/ESP
CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500, SL600, SLK32, SLK230 & SLK320
- Turn ignition switch to Off position.
- Disconnect hydraulic lines. Seal lines and connections.
- Remove plastic caps and hydraulic unit.
- Reverse procedure to install. Torque hydraulic lines to 11 ft. lbs.
ABS Control Unit
CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SL55, SL500& SL600
- On E55, E320, E430 and E500 models, disconnect vacuum line.
- On all models, disconne...
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
Master Cylinder
Brake master...
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Disc Brakes -> Caliper, Replace -> CL55, CL500, CL600, S55, S430, S500 & S600 -> CLK55, CLK320, CLK430, CLK500, E55, E320, E430, E500, SLK32, SLK230 & SLK320 -> Front -> Rear -> SL55, SL500 & SL600
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
SL55, SL500 & SL600
- Disconnect and plug brake hoses, Fig. .
- Disconnect wear sensor connector.
- Remove connector, and if required, speed sensor.
- Remove mounting bolts and caliper from steering knuckle or wheel carrier.
- Reverse procedure to install, noting the following:
- Install new self-locking bolts and tighten to specifications.
- Only transparent (temperature resistance) wear sensors may be installed on rear axle.
- Front wear sensors' contacts must correspond to plug connectors.
- On models equipped with Lucas fixed calipers,wear sensors are installed on outer brake pad.
- On all models, insta...
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Less ESP -> With ESP
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
Less ESP
- Connect suitable brake fluid changing tool following tool manufacturer's instructions. Bleed pressure is 29 psi.
- Open righthand rear brake caliper bleed screw and allow approximately 2.7 ounces of brake fluid to flow out without any bubbles.
- Tighten bleed screw to specifications.
- Repeat bleeding procedure at lefthand rear, righthand front and lefthand front calipers.
- On CL55, CL500, CL600, S55, S430, S500 and S600 models, open master cylinder bleed screw and allow brake fluid to flow without any bubbles. Tighten bleed screw to specifications.
- On all models, operate brake p...
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 MERCEDES-BENZ CLK500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 MERCEDES-BENZ CLK500 cars and light trucks from 1990+.
Disc Brakes -> Rotor, Replace
Vehicle: 2003 MERCEDES-BENZ CLK500 5.0 V8 GAS
- Remove caliper as outlined in "Caliper, Replace." Do not disconnect brake hose.
- On front rotors, remove brake carrier from steering knuckle.
- On rear rotors, disconnect parking brake.
- On all models, remove mounting bolts and...
CLICK HERE TO GET FULL ACCESS TO 2003 MERCEDES-BENZ CLK500 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |