Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Nissan Altima car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Nissan Altima automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Nissan Altima
- 2003 Nissan Altima 2.5 L4 GAS, CC:2500, Fuel Injection
- 2003 Nissan Altima 3.5 V6 GAS, CC:3498, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Hydraulic Brake Systems -> Brake System Bleed -> Anti-Lock Brakes -> Less Anti-Lock Brakes
Vehicle: 2003 Nissan Altima 3.5 V6 GAS
Less Anti-Lock Brakes
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left rear whe...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 2003 Nissan Altima 3.5 V6 GAS
Front
- Raise and support front of vehicle and remove wheels.
- Remove brake hose lock spring and lower pin bolt Figs. through , then pivot caliper body upwards.
- Remove pad retainers, inner and outer shims and pads.
- Install new inner pad and pivot caliper downward.
- Compress piston(s) by inserting bar through caliper opening and prying against torque member.
- Pivot caliper upw...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Disc Brakes -> Caliper Service -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 2003 Nissan Altima 3.5 V6 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheels.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member, Figs. through ,
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals.
- Reverse procedure to assemble.
Rear
Replacement
- Disconnect parking brake cable and brake hose.
- Remove caliper retaining bolts and caliper fro...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Disc Brakes -> Parking Brake Service -> Adjustment -> Frontier & Pathfinder -> Sentra
Vehicle: 2003 Nissan Altima 3.5 V6 GAS
Adjustment
Sentra
- Pull parking brake lever with a force of 44 lbs. and ensure lever travels 7-11 notches.
- Rotate adjuster, Fig. , until proper stroke is obtained, then tighten locknut.
Frontier & Pathfinder
- Pull parking brake lever with a force of 44 lb...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Disc Brakes -> Caliper Service -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 2003 Nissan Altima 2.5 L4 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheels.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member, Figs. through ,
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals.
- Reverse procedure to assemble.
Rear
Replacement
- Disconnect parking brake cable and brake hose.
- Remove caliper retaining bolts and caliper fro...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Nissan Altima cars and light trucks from 1990+.
Nissan -> Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 2003 Nissan Altima 3.5 V6 GAS
Master Cylinder, Replace
Do not spill brake fluid on painted areas, it may cause paint damage.
- Connect a vinyl tube to the bleeder screws.
- Depress brake pedal, open bleeder valves and drain flu...
CLICK HERE TO GET FULL ACCESS TO 2003 Nissan Altima BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
