Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Saab 9-3 car and truck
repair procedures including Saab engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Saab 9-3 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Saab 9-3
- 2003 Saab 9-3 ARC 2.0 L4 GAS, CC:1985, Fuel Injection
- 2003 Saab 9-3 Linear 2.0 L4 GAS, CC:1985, Fuel Injection
- 2003 Saab 9-3 SE 2.0 L4 GAS, CC:1985, Fuel Injection
- 2003 Saab 9-3 Vector 2.0 L4 GAS, CC:1985, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> 9-3 -> 9-5 -> Replacement
Vehicle: 2003 Saab 9-3 ARC 2.0 L4 GAS
Replacement
9-3
- Remove bar fixed between spring struts, then the air canister over throttle body.
- Remove master cylinder as outlined in "Hydraulic Brake Systems."
- Remove brake servo vacuum hose.
- Disconnect electrical distribution box and move aside.
- Remove four brake servo retaining nuts from bracket.
- Remove rubber gaiter from bulkhead partition and pull it toward servo container.
- Disconnect pushrod clip, then the brake servo container.
- Reverse procedure to install. Ensure brake pipe connections do not...
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> 9-3 -> 9-5 -> Parking Brake Cable Equalization -> Parking Brake Lever -> Parking Brake Shoes
Vehicle: 2003 Saab 9-3 Vector 2.0 L4 GAS
Parking Brake Lever
9-3
- Raise rear seat, then pry adjusting device apart.
- Insert a .08 inch feeler gauge between parking brake lever and stop on brake caliper.
- Screw locknut against adjusting sleeve until feeler gauge drops out.
- Apply and release parking brake lever a few times to settle adjusting device.
- Ensure clearance between lever and stop is .02-.08 inch.
- Lower rear seat.
9-5
- Apply parking brake two notches, then raise and support vehicle so rear wheels can spin freely.
- Tighten parking brake lever adjusting nut through center console access hole until brakes just begin to take effect.
- Re...
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 2003 Saab 9-3 ARC 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Master Cylinder Overhaul
Vehicle: 2003 Saab 9-3 Linear 2.0 L4 GAS
Master Cylinder Overhaul
When working on any hydraulic brake components it is extremely important to keep the work area clean. Clean any components that are to be reused with new brake fluid or a cleaning fluid specifically designed for hydraulic components. Wipe all components dry using clean lint-free paper or cloth. Gaskets, seals, O-rings and rubber components should not be reused. Prior to assembly, all components should be generously lubricated with clean brake fluid.
Disassemble
- Clamp master cylinder in soft-jaw vice.
- Remove rubber seals from brake hose connections.
- Carefull...
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Master Cylinder Overhaul
Vehicle: 2003 Saab 9-3 Vector 2.0 L4 GAS
Master Cylinder Overhaul
When working on any hydraulic brake components it is extremely important to keep the work area clean. Clean any components that are to be reused with new brake fluid or a cleaning fluid specifically designed for hydraulic components. Wipe all components dry using clean lint-free paper or cloth. Gaskets, seals, O-rings and rubber components should not be reused. Prior to assembly, all components should be generously lubricated with clean brake fluid.
Disassemble
- Clamp master cylinder in soft-jaw vice.
- Remove rubber seals from brake hose connections.
- Carefull...
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Saab 9-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Saab 9-3 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front
Vehicle: 2003 Saab 9-3 SE 2.0 L4 GAS
Front
Because the brakes are self-adjusting, it is impossible to tell from the brake pedal stroke whether the linings are worn. The lining thickness should be inspected at specified intervals as outlined in "Vehicle Maintenance Schedule" section.
When vehicle is serviced, the brake pads must be replaced before lining thickness falls below .2 inches (5 mm).
- Raise and support vehicle, then remove wheel.
- Press piston back with suitable pliers (1), then remove clip from caliper(2), Fig. .
- Remove dust caps from guide pins, then the guide pins (3).
- Lift brake caliper off brake disc and bind...
CLICK HERE TO GET FULL ACCESS TO 2003 Saab 9-3 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
