Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Toyota Avalon car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Toyota Avalon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Toyota Avalon
- 2003 Toyota Avalon XL 3.0 V6 GAS, CC:2995, Fuel Injection
- 2003 Toyota Avalon XLS 3.0 V6 GAS, CC:2995, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Toyota Avalon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Toyota Avalon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2003 Toyota Avalon XLS 3.0 V6 GAS
The hub bearing could be damaged if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed.
After disconnecting the drive shaft from the axle hub, work carefully so as not to damage the ABS speed sensor rotor serration on the drive shaft.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove front fender apron seal.
- Drain automatic transmission fluid.
- Remove cotter pin and lock cap from drive shaft lock nut.
- With an assistant applying brakes, remove drive shaft lock nut.
- Disconnect tie rod end from steering knuckle.
- Disconne...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Avalon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Toyota Avalon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Toyota Avalon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2003 Toyota Avalon XL 3.0 V6 GAS
The hub bearing could be damaged if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed.
After disconnecting the drive shaft from the axle hub, work carefully so as not to damage the ABS speed sensor rotor serration on the drive shaft.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove front fender apron seal.
- Drain automatic transmission fluid.
- Remove cotter pin and lock cap from drive shaft lock nut.
- With an assistant applying brakes, remove drive shaft lock nut.
- Disconnect tie rod end from steering knuckle.
- Disconne...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Avalon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Toyota Avalon vehicle.
|
| Access the Complete guide! |
