Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Acura MDX car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Acura MDX automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Acura MDX
- 2004 Acura MDX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2004 Acura MDX Touring 3.5 V6 GAS, CC:3471, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Acura MDX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Acura MDX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Acura MDX Touring 3.5 V6 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- If left driveshaft is removed, drain transmission fluid, using a suitable container. It is not required to drain transmission fluid when right driveshaft is removed.
- Remove stabilizer link from dampner.
- Remove lock pin from lower arm ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ba...
CLICK HERE TO GET FULL ACCESS TO 2004 Acura MDX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Acura MDX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Acura MDX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Acura MDX 3.5 V6 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- If left driveshaft is removed, drain transmission fluid, using a suitable container. It is not required to drain transmission fluid when right driveshaft is removed.
- Remove stabilizer link from dampner.
- Remove lock pin from lower arm ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ba...
CLICK HERE TO GET FULL ACCESS TO 2004 Acura MDX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



