Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 GMC Yukon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 GMC Yukon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 GMC Yukon
- 2004 GMC Yukon 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
- 2004 GMC Yukon 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:T
- 2004 GMC Yukon 5.3 V8 FLEX, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:Z
- 2004 GMC Yukon Denali 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2004 GMC Yukon Denali XL 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Aids -> Diagnostic Check -> Diagnostic Tests -> Intermittent & Poor Connections -> Intermittents -> Poor Connections -> Test Procedures
Vehicle: 2004 GMC Yukon 5.3 V8 FLEX
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Test Procedures
Refer to Figs. through for diagnostic test procedures.
Diagnostic Check
- Check for aftermarket devices which could affect the operation of the TPMS to verify that none are installed.
- Check the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
- Ensure that the scan tool selected front and rear tire pressure parameters are correct compared to the tire...
CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2004 GMC Yukon 4.8 V8 GAS
When the Tire Pressure Monitor system detects a significant loss of tire pressure, the CHECK TIRE PRESSURE message is display...
CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2004 GMC Yukon Denali XL 6.0 V8 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2004 GMC Yukon Denali 6.0 V8 GAS
- Apply the Parking brake, then place the ignition switch in the On position.
- Cycle the headlamp switch from Off to Parking Lamp position 4 times within 4 seconds.
- The horn should chirp twice and the low tire pressure warning indicator should begin to flash indicating the system is in the learn mode.
- If GM tool No. J-46079 or equivalent is available, starting with the left front tire, hold the antenna of the tool No. J-46079 near the valve stem on the wheel, then press the activate button and wait for the horn to chirp.
- If the tool is not available, starting with the left front tir...
CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor (Clamp Style) -> Tire Pressure Indicator Sensor (Snap In Style)
Vehicle: 2004 GMC Yukon Denali 6.0 V8 GAS
Tire Pressure Indicator Sensor (Clamp Style)
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over the head.
- Rotate the tire and wheel assembly clockwise using the tire changer w...
CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 GMC Yukon cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2004 GMC Yukon 4.8 V8 GAS
Refer to Fig...
CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
