Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Honda Civic car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Honda Civic automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Honda Civic
- 2004 Honda Civic DX 1.7 L4 GAS, CC:1700, Fuel Injection
- 2004 Honda Civic EX 1.7 L4 GAS, CC:1700, Fuel Injection
- 2004 Honda Civic HX 1.7 L4 GAS, CC:1700, Fuel Injection
- 2004 Honda Civic LX 1.7 L4 GAS, CC:1700, Fuel Injection
- 2004 Honda Civic GX 1.7 L4 CNG, CC:1700, Fuel Injection
- 2004 Honda Civic SI 2.0 L4 GAS, CC:1998, Fuel Injection
- 2004 Honda Civic Hybrid 1.3 L4 ELECTRIC/GAS, CC:1339, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic EX 1.7 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Remove lockpin from lower arm ball joint castle nut and remove nut.
- Pull knuckle outwa...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic HX 1.7 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Remove lockpin from lower arm ball joint castle nut and remove nut.
- Pull knuckle outwa...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic SI 2.0 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer, if lefthand driveshaft is removed.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Separate front stabilizer link from lower arm.
- Remove lockpin from lower arm ball joint castle nut and remove nut. To avoid damaging ball joint install suitable tool onto thread of ball joint. Do not damag...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic GX 1.7 L4 CNG
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Remove lockpin from lower arm ball joint castle nut and remove nut.
- Pull knuckle outwa...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic LX 1.7 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Remove lockpin from lower arm ball joint castle nut and remove nut.
- Pull knuckle outwa...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Honda Civic Hybrid 1.3 L4 ELECTRIC/GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Hold stabilizer ball joint pin with suitable tool and remove flange nut.
- Separate front stabilizer link from lower arm.
- Remove clip from lower arm ball joint castle nut and remove nut.
- Remove nuts and bolts then separa...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
