Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Honda CR-V car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Honda CR-V automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Honda CR-V
- 2004 Honda CR-V EX 2.4 L4 GAS, CC:2400, Fuel Injection
- 2004 Honda CR-V LX 2.4 L4 GAS, CC:2400, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Disc Brakes -> Tightening Specifications
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Power Brake Units -> Power Brake Unit Service -> Power Booster Overhaul -> Power Booster, Replace
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
Power Booster, Replace
- Remove reservoir and remove fluid with suitable syringe.
- Disconnect master cylinder brake lines and electrical connectors.
- Remove mounting nuts and master cylinder.
- Disconnect booster vacuum hose and bracket.
- Remove throttle control cable bracket and disconnect engine wire harness connectors.
- On models equipped with manual transmission,remove clutch reservoir and bracket. Do not disco...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
Refer to Figs. through when servicing drum brakes.
Refer to Figs. through when servicing parking brakes.
Removal
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Loosen parking brake, then remove rear brake drums.
- Remove tension pins by pushing retainer springs while turning.
- Lower brake shoe assembly being careful not to damage wheel cylinder dust cover, then remove lower return spring.
- Disconnect parking brake cable from parking brake lever, then remove brake shoe assembly.
- Remove upper return spring, self-adjuster lever and spring, then separate brake shoes...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Disc Brakes -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
Front
Removal
- Raise and support front of vehicle, then remove tire and wheel assemblies.
- Remove brake hose clamp bolts from steering knuckle, Fig. .
- Remove mounting bolt and swing caliper aside.
- Remove shims, retainers and brake pads.
Installation
- Install pad retainers and apply Molykote M77 compound, or equivalent, to both sides of pad shim.
- Install brake pads and shims.
- Push piston in until caliper fits over pads. Keep piston boot in position to prevent damage when swinging caliper down.
- Swing caliper down and install mounting bolt.
- Install brake hose clamp bolts to steering knuckle, t...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Drum Brakes -> Parking Drum Brake Shoe, Replace
Vehicle: 2004 Honda CR-V LX 2.4 L4 GAS
- Raise and support vehicle, then remove rear tire and wheel assemblies.
- Remove caliper shield and disconnect parking brake cable.
- Remove banjo bolt and disconnect brake hose.
- Remove two mounting bolts and caliper.
- Disconnect and remove upper return springs.
- Remove retainers and tension pins.
- Disconnect rod spring and remove connecting rod.
- Remove lower return spring, adjuster and forward brake shoe.
- Disconnect parking brake cable from ...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Honda CR-V cars and light trucks from 1990+.
Honda -> Drum Brakes -> Adjustments -> Parking Brake
Vehicle: 2004 Honda CR-V LX 2.4 L4 GAS
Parking Brake
- Raise and support vehicle.
- Pull parking brake lever up one click.
- Tighten adjusting nut until brakes drag slightly when turning ...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
