Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Honda CR-V car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Honda CR-V automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Honda CR-V
- 2004 Honda CR-V EX 2.4 L4 GAS, CC:2400, Fuel Injection
- 2004 Honda CR-V LX 2.4 L4 GAS, CC:2400, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Check Engine Lamp -> 2002-09 CR-V
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for a few seconds after the ignition switch is placed in the on position as a bulb check and then the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.
After diagnosis and repair, clear the ECU memory of diagnostic trouble codes. With ignition switch ...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission (A/T) Fluid Temperature Indicator ->
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in On position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the r...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Maintenance Required Lamp -> 2002-09 CR-V, 2003-05 Accord 4-Cylinder Engine
Vehicle: 2004 Honda CR-V LX 2.4 L4 GAS
At 7900-8100 miles this lamp will blink for 10 seconds when the ignition is turned On. At 9900-10,000 miles the lamp will remain lit at ignition switch On position.
To reset the maintenanc...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 2002-04 CR-V
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D lamp will usually blink and or the MIL will be illuminated. After completing diagnosis and repairs, reset the D or MIL as follows:
- Obtain th...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 2002-05 CR-V
Vehicle: 2004 Honda CR-V EX 2.4 L4 GAS
The Anti-Lock warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After diagnosis and repair of the system, clear the ABS DTCs as follows:
- Place ignition switch in the Off position.
- Connect the Honda PGM Tester, or equivalent suitable scan tool, to the DLC connector located behind the driver's kick panel.
- Select SC...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Honda CR-V AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Honda CR-V cars and light trucks sold in the U.S. from 1990+.
Honda -> Electric Power Steering (EPS) Warning Indicator ->
Vehicle: 2004 Honda CR-V LX 2.4 L4 GAS
The Electric Power Steering (EPS) warning lamp should be illuminate when the ignition switch is placed in the On position and should turn Off as soon as the engine is started. If the indicator comes On while driving the vehicle, pull the vehicle off to the side of the road. Restart the system by restarting the engine. If the indicator does not go Off after driving a short distance, or comes On again, a fault in the electric ...
CLICK HERE TO GET FULL ACCESS TO 2004 Honda CR-V MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
