Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Infiniti M45 car and truck
repair procedures including Infiniti engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Infiniti M45 automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Infiniti M45 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Infiniti M45 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 Infiniti M45 4.5 V8 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Remove cotter pin and driveshaft castle nut and washer from front hub.
- Remove exhaust center tube.
- Remove nuts and bolts between final drive and driveshaft.
- Separate wheel hub and bearing assembly from driveshaft by lightly tapping end with suitable tool and wood block, then re...
CLICK HERE TO GET FULL ACCESS TO 2004 Infiniti M45 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Infiniti M45 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Infiniti M45 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front
Vehicle: 2004 Infiniti M45 4.5 V8 GAS
Front
- Place vehicle in neutral and release parking brake.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove exhaust front tube and center muffler.
- Remove floor reinforcement.
- Loosen center bearing bracket nuts. Do not remove center bearing bracket nuts.
- Mark companion flange on front drive. Its recommended to use paint for refere...
CLICK HERE TO GET FULL ACCESS TO 2004 Infiniti M45 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



