Auto Parts Search

We have info for following modifications of 2004 KIA Spectra
- 2004 KIA Spectra 1.8 L4 GAS, CC:1793, Fuel Injection, Engine VIN:, Desg:1
- 2004 KIA Spectra EX 2.0 L4 GAS, CC:1975, Fuel Injection
- 2004 KIA Spectra LX 2.0 L4 GAS, CC:1975, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 KIA Spectra LX 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable ...
CLICK HERE TO GET FULL ACCESS TO 2004 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 KIA Spectra 1.8 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove drain plug and drain transaxle fluid into suitable container.
- Remove wheel nuts and front wheels.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.Do not damage dust cover or oil seal.
- Loosen and remove bolt from knuckle and disconnect ball joint from knuckle.
- Remove driveshaft from transaxle with suitable tool. There will be initial resistance until clip is collapsed and ...
CLICK HERE TO GET FULL ACCESS TO 2004 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2004 KIA Spectra EX 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable ...
CLICK HERE TO GET FULL ACCESS TO 2004 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |