Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Saturn L Series car and truck
repair procedures including Saturn engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Saturn L Series automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Saturn L Series
- 2004 Saturn L Series 3.0 V6 GAS, CC:3000, CID:181, Fuel Injection, Aspiration:181
- 2004 Saturn L Series 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Saturn L Series AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Saturn L Series cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Saturn L Series 3.0 V6 GAS
- With the vehicle on the ground, depress brake pedal and remove cotter and drive axle nut. Discard nut and cotter.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove tie rod end torque prevailing nut and discard nut.
- Using a suitable puller, separate the tie rod end from the steering knuckle. Do not attempt to separate the joint using a wedge-type tool because seal may be damaged.
- Remove lower control arm to steering knuckle nut and bolt.
- Separate lower control arm from steering knuckle.
- While pulling knuckle/strut assembly away from vehicle, pull outer end of driv...
CLICK HERE TO GET FULL ACCESS TO 2004 Saturn L Series DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Saturn L Series AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Saturn L Series cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Saturn L Series 2.2 L4 GAS
- With the vehicle on the ground, depress brake pedal and remove cotter and drive axle nut. Discard nut and cotter.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove tie rod end torque prevailing nut and discard nut.
- Using a suitable puller, separate the tie rod end from the steering knuckle. Do not attempt to separate the joint using a wedge-type tool because seal may be damaged.
- Remove lower control arm to steering knuckle nut and bolt.
- Separate lower control arm from steering knuckle.
- While pulling knuckle/strut assembly away from vehicle, pull outer end of driv...
CLICK HERE TO GET FULL ACCESS TO 2004 Saturn L Series DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



