Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 2004 Scion XB 1.5 L4 GAS
Removal
Refer to Fig. for exploded view of rear brake drum assembly.
- Raise and support vehicle to remove rear wheel.
- Drain brake fluid into suitable container.
- Release parking brake lever and remove brake drum.
- Remove hole plug and install suitable screwdriver into hole on backing plate to hold rear brake automatic adjust lever away from adjuster, Fig. .
- Compress brake shoe adjuster using suitable screwdriver by turning adjusting wheel.
- Remove rear brake drum from vehicle.
- Disconnect shoe return spring from front and rear brake shoe using tool No. 09703-30010 or equivalent, Fig. .
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Hydraulic Brake Systems -> Troubleshooting -> Brake Drag -> Brake Pull -> Hard Pedal Brake Inefficient -> Low Pedal Or Spongy Pedal -> Noise From Brakes
Vehicle: 2004 Scion XB 1.5 L4 GAS
Low Pedal Or Spongy Pedal
- Fluid leaks in brake system.
- Air in brake system.
- Piston seal worn or damaged.
- Rear brake shoe clearance out of adjustment.
- Faulty brake master cylinder.
- Booster push rod out of adjustment.
Brake Drag
- Minimal brake pedal free play.
- Parking brake lever traveler out of adjustment.
- Parking brake wire stuck.
- Rear brake shoe clearance out of adjustment.
- Pad or lining cracked/distorted.
- Faulty piston (stuck/frozen).
- Faulty tension or return spring.
- Booster push rod out of adjustment.
- Vacuum leaks in booster system.
- Faulty brake master cylinder.
Brake Pull
- Faulty piston (stuck/f...
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Power Brake Units -> Adjustments -> Brake Pedal Height & Freeplay
Vehicle: 2004 Scion XB 1.5 L4 GAS
Brake Pedal Height & Freeplay
Refer to Fig. for pedal height and freeplay specifications.
- Remove lower instrument finish panel.
- Disconnect stop lamp switch electrical connector.
- Loosen stop lamp switch lock nut, then remove stop lamp switch.
- Loosen brake master cylinder push rod clevis lock nut.
- Adjust pedal height by turning pedal push rod.
- Torque push rod lock nut to 19 ft. lbs.
- Install stop lam...
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Disc Brakes -> Tightening Specifications
Vehicle: 2004 Scion XB 1.5 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Brake Booster, Replace -> tC -> xA & xB
Vehicle: 2004 Scion XB 1.5 L4 GAS
Brake Booster, Replace
xA & xB
- Remove brake master cylinder as outlined under .
- Remove battery ground, then the battery.
- Remove brake actuator and bracket.
- Slide clip and disconnect vacuum hose from brake booster.
- Remove brake pedal return spring, clip and clevis pin.
- Loosen push rod clevis lock nut.
- Remove four nuts, then the push rod clevis.
- Remove brake booster assembly from vehicle.
- Reverse procedure to install, noting the following:
- Torque brake booster nuts to 108 inch lbs.
- Bleed master cylinder and brake lines as outlined under ..
tC
- Remove brake master cylinder as outlined un...
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2004 Scion XB AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2004 Scion XB cars and light trucks from 1990+.
Scion -> Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2004 Scion XB 1.5 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2004 Scion XB BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |