Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Subaru Impreza car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Subaru Impreza automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Subaru Impreza
- 2004 Subaru Impreza Outback 2.5 H4 GAS, CC:2458, Fuel Injection
- 2004 Subaru Impreza RS 2.5 H4 GAS, CC:2458, Fuel Injection
- 2004 Subaru Impreza TS 2.5 H4 GAS, CC:2458, Fuel Injection
- 2004 Subaru Impreza WRX 2.0 H4 GAS, CC:1994, Fuel Injection
- 2004 Subaru Impreza WRX STI 2.5 H4 GAS, CC:2458, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2004 Subaru Impreza Outback 2.5 H4 GAS
Wrap metal parts with a cloth or rubber material. Rubber boot may be damaged due to interference with adjacent metal parts during removal.
- Disconnect battery ground cable.
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover bolts, then remove mount.
- Place reference mark on front driveline and rear differential flange. Paint is recommended for match marks. Never damage rear driveline shaft flange yoke or ...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2004 Subaru Impreza TS 2.5 H4 GAS
Wrap metal parts with a cloth or rubber material. Rubber boot may be damaged due to interference with adjacent metal parts during removal.
- Disconnect battery ground cable.
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover bolts, then remove mount.
- Place reference mark on front driveline and rear differential flange. Paint is recommended for match marks. Never damage rear driveline shaft flange yoke or ...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Subaru Impreza WRX 2.0 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brake pedal. Remove wheel before loosening axle nut.
- Remove stabilizer link from front arm.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of h...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Subaru Impreza WRX STI 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brake pedal. Remove wheel before loosening axle nut.
- Remove stabilizer link from front arm.
- Disconnect transverse link from housing.
- Remove spring pin which secures transmission spindle and install new spring upon installation.
- Remove front driveshaft assembly. If driveshaft is hard to remove use suitable puller to aid in removal.
- Remo...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Subaru Impreza TS 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove wheel hub locknut using suitable tool. Loosen and retighten axle nut after removing wheel from vehicle. Failure to follow this instruction may damage wheel bearings.
- Disconnect transverse link from housing.
- Remove spring pin which secures transmission spindle and install a new spring pin upon installation.
- Remove front driveshaft assembly. If driveshaft is hard to remove use suitable...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Subaru Impreza cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2004 Subaru Impreza Outback 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove wheel hub locknut using suitable tool. Loosen and retighten axle nut after removing wheel from vehicle. Failure to follow this instruction may damage wheel bearings.
- Disconnect transverse link from housing.
- Remove spring pin which secures transmission spindle and install a new spring pin upon installation.
- Remove front driveshaft assembly. If driveshaft is hard to remove use suitable...
CLICK HERE TO GET FULL ACCESS TO 2004 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Subaru Impreza vehicle.
|
| Access the Complete guide! |
