Auto Parts Search
We have info for following modifications of 2005 BMW X3
- 2005 BMW X3 2.5I 2.5 L6 GAS, CC:2494, CID:152, Fuel Injection, Aspiration:152
- 2005 BMW X3 3.0I 3.0 L6 GAS, CC:2979, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Service Interval Indicator -> X3 -> Interval Indicator -> Less Underhood Diagnostic Connector -> Oil Service -> With Underhood Diagnostic Connector
Vehicle: 2005 BMW X3 2.5I 2.5 L6 GAS
Less Underhood Diagnostic Connector
On these models the SII reset tool cannot be used. Resetting is possible using the instrument cluster trip odometer reset button. Proceed as follows:
- Turn ignition Off.
- Press and hold trip odometer reset button, then turn ignition to "1" (Accessory).
- Keep odometer reset button depressed for approximately five more seconds until any of following words appear in display: "Oil Service" or "Inspection" with "Reset" or "Re." On models equipped with high cluster, remaining amount of fuel in liters until next service is displayed should appear.
- Depress and hold odometer ...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2005 BMW X3 2.5I 2.5 L6 GAS
The Anti-Lock warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the ...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2004-09 X3 -> Less iDrive -> Reset -> With iDrive
Vehicle: 2005 BMW X3 2.5I 2.5 L6 GAS
Reset
The reset procedure needs to be performed anytime the tire pressure is adjusted or the tires are rotated.
Less iDrive
- Turn ignition switch to On with vehicle in a stationary position.
- Press the Tire Pressure Warning/RDC button, located at front console or on the instrument panel, until the indicator lamp on the instrument panel is illuminated...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Transmission Indicator Lamp ->
Vehicle: 2005 BMW X3 3.0I 3.0 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the system ...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2005 BMW X3 3.0I 3.0 L6 GAS
The Anti-Lock warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the ...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 BMW X3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 BMW X3 cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Stability Control (ASC, ASC+) & Dynamic Stability Control (DSC) Warning Lamp ->
Vehicle: 2005 BMW X3 3.0I 3.0 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the syst...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X3 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 BMW X3 vehicle. |
Access the Complete guide! |