Auto Parts Search
We have info for following modifications of 2005 Chevrolet Trailblazer
- 2005 Chevrolet Trailblazer EXT LS 4.2 L6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:S
- 2005 Chevrolet Trailblazer EXT LS 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:M
- 2005 Chevrolet Trailblazer EXT LT 4.2 L6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:S
- 2005 Chevrolet Trailblazer EXT LT 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:M
- 2005 Chevrolet Trailblazer LS 4.2 L6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:S
- 2005 Chevrolet Trailblazer LT 4.2 L6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:S
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2005 Chevrolet Trailblazer LS 4.2 L6 GAS
Front
- Raise and support vehicle.
- Mark the front U-joint to the pinion yoke on the front differential.
- Mark the relationship of the rear U-joint to the transfer case drive flange.
- Remove the retaining nuts and bolts from the drive flange.
- Remove the clamps and retaining bolts from the front drive axle pinion flange.
- Remove the front propeller shaft from the vehicle.
- Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
- Reverse procedure to install, noting the following:
- Torque front propeller shaft to the pinion flang...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2005 Chevrolet Trailblazer EXT LT 5.3 V8 GAS
Front
- Raise and support vehicle.
- Mark the front U-joint to the pinion yoke on the front differential.
- Mark the relationship of the rear U-joint to the transfer case drive flange.
- Remove the retaining nuts and bolts from the drive flange.
- Remove the clamps and retaining bolts from the front drive axle pinion flange.
- Remove the front propeller shaft from the vehicle.
- Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
- Reverse procedure to install, noting the following:
- Torque front propeller shaft to the pinion flang...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Trailblazer LS 4.2 L6 GAS
- Unlock steering column so that steering linkage is free to move.
- Raise the vehicle. Support vehicle with suitable safety stands.
- Remove front tire and wheel assemblies.
- In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
- Remove axle nut and washer.
- Remove drift from brake rotor.
- Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
- Remove brackets from upper control arm holding both ABS wire and brake hose.
- Remove ABS bracket located on top of upper control arm ball...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Trailblazer EXT LS 5.3 V8 GAS
- Unlock steering column so that steering linkage is free to move.
- Raise the vehicle. Support vehicle with suitable safety stands.
- Remove front tire and wheel assemblies.
- In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
- Remove axle nut and washer.
- Remove drift from brake rotor.
- Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
- Remove brackets from upper control arm holding both ABS wire and brake hose.
- Remove ABS bracket located on top of upper control arm ball...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Trailblazer LT 4.2 L6 GAS
- Unlock steering column so that steering linkage is free to move.
- Raise the vehicle. Support vehicle with suitable safety stands.
- Remove front tire and wheel assemblies.
- In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
- Remove axle nut and washer.
- Remove drift from brake rotor.
- Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
- Remove brackets from upper control arm holding both ABS wire and brake hose.
- Remove ABS bracket located on top of upper control arm ball...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Trailblazer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Trailblazer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Trailblazer EXT LS 4.2 L6 GAS
- Unlock steering column so that steering linkage is free to move.
- Raise the vehicle. Support vehicle with suitable safety stands.
- Remove front tire and wheel assemblies.
- In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
- Remove axle nut and washer.
- Remove drift from brake rotor.
- Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
- Remove brackets from upper control arm holding both ABS wire and brake hose.
- Remove ABS bracket located on top of upper control arm ball...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Trailblazer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Chevrolet Trailblazer vehicle. |
Access the Complete guide! |