Auto Parts Search
We have info for following modifications of 2005 Chrysler Sebring
- 2005 Chrysler Sebring 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 2005 Chrysler Sebring 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
- 2005 Chrysler Sebring 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2005 Chrysler Sebring 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2005 Chrysler Sebring 2.7 V6 FLEX, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:T
- 2005 Chrysler Sebring 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Anti-Lock Brakes -> Teves Anti-Lock Braking System -> System Service -> ABS Portion -> Brake System Bleed -> Caliber -> Charger, Magnum & 300 -> Clockspring Centering -> Component Replacement -> Concorde, Intrepid & 300M -> ESP Dynamics Sensor -> Front -> Front w/AWD -> Front w/RWD -> Integrated Control Unit (ICU) -> Manual Bleed -> Neon -> Non-ABS Portion -> Pressure Bleed -> Rear -> Sebring Convertible, Sebring Sedan & Stratus Sedan -> Steering Angle Sensor -> Wheel Speed Sensor
Vehicle: 2005 Chrysler Sebring 2.7 V6 FLEX
Brake System Bleed
The Teves anti-lock brake system must be bled as two independent braking systems. The non-ABS portion of the brake system should be bled the same as any non-ABS system. The ABS portion of the system requires the use of a DRB, or equivalently programmed scan tool.
Non-ABS Portion
Pressure Bleed
Use bleeder tank tool No. C-3496-B, or equivalent, and adapter tool No. BB400-9A, or equivalent, to pressurize hydraulic system.
Normal pressure bleeder pressure should not be more than 35 psi. On models equipped with plastic reservoirs, do not exceed 25 psi bleeding pressure.
- ...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Bench Bleeding -> Manual Bleed -> Master Cylinder Bleed -> On-Vehicle Bleeding -> Pressure Bleed
Vehicle: 2005 Chrysler Sebring 3.0 V6 GAS
Pressure Bleed
Use bleeder tank tool No. C-3496-B, or equivalent, and adapter tool No. BB400-9A, or equivalent, to pressurize hydraulic system.
Normal pressure bleeder pressure should not be more than 35 psi. On models equipped with plastic reservoirs, do not exceed 25 psi bleeding pressure.
- Attach suitable clear plastic hose to bleeder screw and submerge other end into clear container with clean brake fluid.
- Open bleeder screw at least one full turn.
- Bleed 4-8 ounces of fluid through system until air free flow is maintained.
- Repeat procedure at all screws.
- If pedal travel is excess...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Anti-Lock Brake System -> Caliber & 2007 Sebring Sedan -> Charger, Magnum & 300 -> Concorde, Intrepid & 300M -> Crossfire -> Except Caliber & 2007 Sebring Sedan -> Fluid Reservoir -> Hydraulic Control Unit -> Junction Block -> Less Anti-Lock Brake System -> Master Cylinder -> Neon -> Proportioning Valve -> Sebring Convertible, Stratus Sedan & 2004-06 Sebring Sedan -> Sebring Coupe & Stratus Coupe -> With ABS -> With Anti-Lock Brake System -> Without ABS
Vehicle: 2005 Chrysler Sebring 2.7 V6 FLEX
Fluid Reservoir
Caliber & 2007 Sebring Sedan
- Clean master cylinder housing and brake fluid reservoir.
- Remove brake fluid reservoir cap, then siphon as much brake fluid as possible from reservoir.
- Remove reservoir to master cylinder mounting screws.
- Pull reservoir straight up to remove from master cylinder.
- Remove brake fluid switch from reservoir.
- Reverse procedure to install.
Except Caliber & 2007 Sebring Sedan
These models use ISO style flares that are of metric dimension. Use ISO style tubing flares and metric tubing when performing any repairs.
- Remove reservoir caps.
- Remove reser...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Drum Brakes -> Sebring Coupe & Stratus Coupe -> Adjustments -> Parking Brake
Vehicle: 2005 Chrysler Sebring 3.0 V6 GAS
Parking Brake
These brakes are equipped with self adjusting mechanisms. Periodic adjustments are not required. If stopping power is insufficient, or if brake pedal travel is excessive, brakes and self adjusting mechanism should be cleaned and inspected.
After performing brake service, adjust parking brake as follows:
- Apply parking brake lever with force of approximately 45 lbs. while counting clicks. Lever should click 5-7 times.
- If not within specifications, release parking brake lev...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Master Cylinder
Vehicle: 2005 Chrysler Sebring 2.4 L4 GAS
Master Cylinder
The master cylinder is a center valve master cylinder used for all applications. The brake fluid reservoir mounted on top and brake fluid level switch is mounted on the side of the reservoir.
The reservoir is indexed to prevent installation in the wrong direction. The cap diaphragm is slit to allow atmospheric pressure to equalize on both sides of diaphragm.
The primary and secondary outlet tubes of the master cylinder are connected to a junction block on non-ABS equipped vehicles. The master cylinder primary ...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Chrysler Sebring cars and light trucks from 1990+.
Disc Brakes -> Sebring Convertible, Stratus Sedan & 2004-06 Sebring Sedan -> Adjustments -> Parking Brake Lever -> Parking Brake Shoe
Vehicle: 2005 Chrysler Sebring 2.4 L4 GAS
Parking Brake Lever
- Remove center floor console and lower parking brake handle.
- Position lever to its fully released position.
- Tighten adjusting nut on parking brake lever output cable until approximately 1.02 inch of thread is past edge of adjusting nut.
- Actuate parking brake lever to its fully applied position (22 clicks) one time, then position lever to its fully released position.
- Raise and support rear of vehicle.
- Turn rear wheel with parking brake in release...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler Sebring BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Chrysler Sebring vehicle. |
Access the Complete guide! |