Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Dodge Dakota car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Dodge Dakota automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Dodge Dakota
- 2005 Dodge Dakota 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2005 Dodge Dakota 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2005 Dodge Dakota 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Disc Brakes -> Troubleshooting -> Brake Chatter -> Brake Drag -> Brake Fade -> Brake Pull -> Brake Squeal Or Squeak -> Hard Pedal Or High Pedal Effort -> Low Pedal -> Pedal Falls Away -> Pedal Pulsation -> Rear Brake Grab Or Pull -> Spongy Pedal
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
Pedal Falls Away
- System leak at brake line, fitting, hose or caliper/wheel cylinder.
- Internal leakage in master cylinder caused by worn or damaged piston cups.
- Internal leak in ABS or RWAL system.
Low Pedal
- Worn brake linings.
- Worn drums or rotors.
- Rear brakes out of adjustment.
Spongy Pedal
- Air in hydraulic system.
- Thin brake drums.
- Substandard brake lines and hoses.
Hard Pedal Or High Pedal Effort
- Linings that are water soaked, contaminated or glazed.
- Faulty power booster or check valve.
Pedal Pulsation
- Disc brake rotors have excessive lateral runout or thickness variation.
- Out of round brake ...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Drum Brakes -> DaimlerChrysler -> Tightening Specifications
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Anti-Lock Brakes -> Dakota -> System Service -> 2WD -> 4WD -> Anti-Lock Brake System (ABS) Bleed -> Component Replacement -> Controller Anit-Lock Brake (CAB) Module, Replace -> Front Wheel Speed Sensor, Replace -> Hydraulic Control Unit (HCU), Replace -> Manual/Base System Bleed -> Master Cylinder Bleed -> Pressure Bleed -> Rear Wheel Speed Sensor, Replace -> RWAL Valve, Replace
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
Manual/Base System Bleed
- Remove reservoir filler caps and fill reservoir with proper brake fluid.
- If calipers or wheel cylinders were overhauled, open all caliper and wheel cylinder bleed screws.
- Close each bleed screw as fluid starts to drip from them.
- Fill master cylinder reservoir once more before proceeding.
- Attach one end of bleed hose to bleed screw and insert opposite end in glass container partially filled with brake fluid, Fig. . Ensure bleed hose is immersed in fluid.
- Open up bleeder, then have an assistant press down brake pedal.
- Once brake pedal is down, close bleeder. Repea...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
These self contained vacuum hydraulic power braking units are of the vacuum suspended type. They use engine intake manifold vacuum or a vacuum pump along with atmospheric pressure for their power, eliminating the need for a vacuum reservoir. A mechanically operated control valve, with integral vacuum power diaphragms, controls the degree of brake application or release depending on amount of foot pressure applied to...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Anti-Lock Brakes -> Dakota -> Precautions -> General Service Precautions
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
General Service Precautions
Certain components of the anti-lock brake system are not intended to be serviced individually. Attempting to remove or disconnect components of this type may result in personal injury and/or improper system operation. Only the components with removal and installation procedures should be serviced.
Observe the following general precautions when servicing the anti-lock b...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Dodge Dakota cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Caravan, Town & Country & Voyager -> Commander -> Dakota & Durango -> Disassemble -> Front -> Full Size Pickup -> Grand Cherokee, Liberty & Wrangler -> Inspection -> Installation -> Pacifica -> PT Cruiser -> Rear -> Removal -> Sprinter
Vehicle: 2005 Dodge Dakota 4.7 V8 GAS
Caravan, Town & Country & Voyager
Refer to for caliper replacement procedures.
Disassemble
- Remove caliper from adapter and rotor as outlined under . Do not disconnect brake hose from caliper. Support caliper at all times to prevent brake hose damage.
- Position caliper away from rotor to prevent brake fluid spillage on machined surface, then place a small block of wood between caliper fingers to prevent piston damage during removal.
- Gently depress brake pedal to force caliper piston out of bore, then secure brake pedal at any position below one inch of pedal travel to prevent master cy...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Dakota BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Dodge Dakota vehicle.
|
| Access the Complete guide! |
