Auto Parts Search
We have info for following modifications of 2005 Hyundai Accent
- 2005 Hyundai Accent GLS 1.6 L4 GAS, CC:1600, Fuel Injection, Engine VIN:, Desg:C
- 2005 Hyundai Accent GT 1.6 L4 GAS, CC:1600, Fuel Injection, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Drum Brakes -> Adjustments -> Parking Brake
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
Parking Brake
Service brakes must be properly adjusted before attempting to adjust parking brake lever.
- Pull parking brake lever upward with a force of approximately 44 lbs. noting the following:
- On Accent models, a stroke of 5-7 notches on lever is acceptable.
- ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Power Brake Units -> Troubleshooting -> Check Valve Operation
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
Check Valve Operation
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Hydraulic Brake Systems -> Brake System Bleed -> Less Anti-Lock Brakes -> With Anti-Lock Brakes
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
Less Anti-Lock Brakes
- Fill master cylinder reservoir with brake fluid.
- Insert end of hose into a container full of brake fluid using a suitable length and diameter of vinyl hose.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake pedal slowly several times, then hold-down, do not depress completely.
- Loosen bleeder valve, then watch for air bubbles in fluid.
- Tighten bleeder screw before pressure is lost inline. Tighten bleeder screw.
- Repeat procedure until all air bubbles are absent, brake pedal is firm and no leak...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Drum Brakes -> Brake Service -> Accent, Elantra, Sonata & Tiburon -> Inspection -> Replacement -> Santa Fe
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
Replacement
Accent, Elantra, Sonata & Tiburon
- Raise and support vehicle, then remove wheel/tire assembly.
- On Accent, Elantra and Tiburon models, remove axle nut, then the hub and drum assembly, Fig. .
- On Sonata models, remove brake drum. If drum is difficult to remove, screw in bolts to pull drum out, Fig. .
- On all models, remove end shoe springs, cylinder and hold-down spring.
- Remove shoes and adjuster as an assembly.
- Reverse procedure to install, noting the following:
- Apply suitable grease to backing plate shoe contact surfaces.
- Install shoe hold-down pin, then assemble return spring wit...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Power Brake Units -> Power Brake Unit, Replace
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
- Remove master cylinder as outlined under .
- Disconnect vacuum hose.
- From inside vehicle, separate brake pedal to booster rod ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Hyundai Accent AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Hyundai Accent cars and light trucks from 1990+.
Hyundai -> Disc Brakes -> Brake Pad Service -> Accent -> Elantra & Tiburon -> Elantra, Sonata & Tiburon -> Front -> Rear -> Santa Fe & Tucson -> Sonata -> XG 350
Vehicle: 2005 Hyundai Accent GT 1.6 L4 GAS
Front
Accent
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using a suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
Elantra, Sonata & Tiburon
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two mounting bolts attaching caliper to torque plate, Fig. .
- Remove brake caliper assembly, then position aside using suitable wire.
- Remove brake pads.
- Install pad cl...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Accent BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Hyundai Accent vehicle. |
Access the Complete guide! |