Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Disc Brakes -> Brake Pad Service -> Amanti & Sorento -> Front -> Inspection -> Optima -> Rear -> Replacement -> Rio -> Sedona -> Spectra -> Sportage
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
Replacement
Front
Amanti & Sorento
- Remove front disc brakes components, Fig. .
- Reverse procedure to install. Tighten bolts and wheel lug nuts to specifications.
Rio
- Remove front disc brakes components, Fig. .
- Reverse procedure to install. Tighten bolts and wheel lug nuts to specifications.
Sedona
- Raise and support vehicle.
- Remove tire and wheel.
- Remove caliper mounting bolts, then position caliper aside using suitable wire or rope.
- Remove pads from caliper.
- Reverse procedure to install, noting the following:
- Use brake expander tool No. 0K130 430 017, or equivalent, when inserting new pads.
- B...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Power Brake Units -> Power Brake Unit Service -> Amanti, Rio, Sedona, Sorento & Spectra -> Optima & Sportage -> Replacement
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
Replacement
Amanti, Rio, Sedona, Sorento & Spectra
- Remove master cylinder as outlined under .
- Remove power brake unit in numbered sequence, Fig. .
- Reverse procedure to install, noting the following:
- Inspect all components for brake fluid leakage. Replace as required.
- Lubricate clevis pin with suitable white lithium grease.
- Tighten all bolt...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Hydraulic Brake Systems -> Component Service -> 2003-04 -> 2005 -> Amanti -> Master Cylinder -> Optima & Sportage -> Rio -> Sorento -> Spectra -> Wheel Cylinder
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
Master Cylinder
Amanti
- Secure master cylinder assembly in a suitable vise.
- Remove reservoir cap, Fig. , then drain brake fluid into a suitable container.
- Remove fluid level sensor.
- Separate reservoir from master cylinder. Discard seals.
- Push primary piston into cylinder bore to ease snap ring removal, then remove snap ring and piston.
- Push secondary piston into bore, then remove secondary piston stop screw.
- Place a suitable shop towel in bore to catch secondary piston.
- Remove secondary piston using compressed air through port. Do not disassemble primary and secondary piston assembly.
- Re...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Disc Brakes -> Caliper Service -> Amanti, Rio, Sedona, Sorento & Spectra -> Assemble -> Disassemble -> Front -> Installation -> Optima -> Rear -> Removal -> Replacement -> Sportage
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
Replacement
Amanti, Rio, Sedona, Sorento & Spectra
Remove caliper in numbered sequence, Figs. , , and .
Optima
Front
Removal
- Remove wheel/tire assembly.
- Remove brake hose from caliper.
- Remove caliper assembly by removing the torque plate.
Disassemble
- Loosen attaching bolts and separate caliper.
- Remove boot ring, using screwdriver.
- Remove piston boot, Fig. .
- Remove piston by applying compressed air through brake hose fitting hose. Keep fingers clear of front of piston.
- Remove piston seal. Use caution not to damage the cylinder walls.
- Apply suitable brake fluid to the cylinder walls.
Assemble
- Cle...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 KIA Amanti AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 KIA Amanti cars and light trucks from 1990+.
Kia -> Disc Brakes -> Rotor, Replace
Vehicle: 2005 KIA Amanti 3.5 V6 GAS
Replace r...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Amanti BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |