Auto Parts Search
2005 Land Rover Freelander CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Land Rover REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
FUEL FILTER REPLACEMENT PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Land Rover -> Component Locations -> Freelander & LR3
Vehicle: 2005 Land Rover Freelander SE 2.5 V6 GAS
The fuel filter is located...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
DRIVESHAFT, Replace
Vehicle: 2005 Land Rover Freelander SE3 2.5 V6 GAS
Front
- Disconnect negative cable from battery.
- Raise and support front of vehicle.
- Remove wheel and tire assembly.
- Remove underbelly panel.
- Remove three bolts and remove splash shield.
- Remove stake from drive shaft nut.
- With an assistant applying the brakes, remove and discard drive shaft nut.
- Remove clip securing brake hose and release hose from damper bracket.
- Release ABS sensor harness and brake hose from damper.
- Release ABS sensor from hub.
- Remove two bolts securing brake caliper to hub. Release caliper from hub and tie aside. Do not allow caliper to hang on brake hose.
- Remove two...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Alternator, Replace
Vehicle: 2005 Land Rover Freelander SE3 2.5 V6 GAS
- Disconnect battery ground cable.
- Raise and support front of vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Remove screws, bolts front noise insulation.
- Loosen clip and disconnect fresh air intake hose from engine cover and mass airflow (MAF) sensor.
- Release fasteners and remove engine cover.
- Remove bolt securing upper right engine support to top arm.
- Loosen bolt securing upper right engine support to body, pivot engine support away from top arm.
- Support engine with a suitable wooden block and jack, positioned under eng...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Cabin Air Filter Service -> Land Rover -> 2002-05 Freelander
Vehicle: 2005 Land Rover Freelander SE 2.5 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 12,000 miles.
- Open the hood.
- Lift both the driver and passenger side wiper arms from the windshield, then depress the release levers and remove the blades.
- Remove the wiper arm nut covers, then the nuts and wiper arms. Note the wiper arm positions for use during installation.
- Remove the hood weather strip, Fig. .
- Remove the cowl air inlet grille retaining screws and clips, then the cowl air grille, Fig. .
- Remove the clips securing the cabin air filter element r...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Land Rover -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2005 Land Rover Freelander SE 2.5 V6 GAS
The ABS warning lamp should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp remains illuminated or comes on while ...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2005 Land Rover Freelander SE 2.5 V6 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition clamp and remove hose from heater core.
- Reposition clamp and remove hose from coolant rail.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2005 Land Rover Freelander AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2005 Land Rover Freelander SE 2.5 V6 GAS
- Raise and support vehicle, then remove engine undercover.
- Lower vehicle and remove engine acoustic cover.
- Remove righthand upper engine mount to top arm attaching bolt.
- Loosen upper righthand engine mount to body attaching bolt, then pivot engine mount away from top arm.
- Remove engine top arm bracket to righthand hydra-mount and front engine moun...
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander SERPENTINE BELT SERVICE PROCEDURES
WIRING DIAGRAMS FOR 2005 Land Rover Freelander AUTOMOBILES
OEM drawn wiring diagrams for most 2005 Land Rover Freelander cars and light trucks sold in the U.S.
2005 Land Rover Freelander SE 2.5 V6 GAS Wiring Diagram Components on diagram: |
2005 Land Rover Freelander SE 2.5 V6 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2005 Land Rover Freelander AUTOMOBILES
OEM TSB listings for most 2005 Land Rover Freelander cars and light trucks sold in the U.S. from 1985+.
Document: SERVICE ACTION: FUEL PUMP MODULE OPERATION Vehicle: 2005 Land Rover Freelander SE3 2.5 V6 GAS Auto Systems: |
Document: ALUMINUM ENGINE COMPONENTS THREAD REPAIR - REVISED Vehicle: 2005 Land Rover Freelander SE3 2.5 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2005 Land Rover Freelander AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2005 Land Rover Freelander cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2005 Land Rover Freelander cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2005 Land Rover Freelander cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2005 Land Rover Freelander cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2005 Land Rover Freelander SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Land Rover Freelander vehicle. |
Access the Complete guide! |