Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Subaru Baja car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Subaru Baja automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Subaru Baja
- 2005 Subaru Baja Sport 2.5 H4 GAS, CC:2458, Fuel Injection
- 2005 Subaru Baja Turbo 2.5 H4 GAS, CC:2458, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Hydraulic Brake Systems -> Component Service -> Master Cylinder
Vehicle: 2005 Subaru Baja Turbo 2.5 H4 GAS
Master Cylinder
- Remove master cylinder from vehicle.
- Remove cylinder pin, Fig. .
- Push piston inward, then remove snap ring.
- Apply pressure to piston assembly while Inserting a small screwdriver into window of piston retainer and raise piston retainer latch, Fig. .
- Remove primary and secondary piston assemblies. Do not disassemble pistons. if disassembled, the spring settings will change.
- Inspect master cylinder inside diameter to piston clearance, Service limit is not to exceed .043 inch.
- Clean all components with clean brake fluid,...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Hydraulic Brake Systems -> Description -> Dual Proportioning Valve (DPV) -> Master Cylinder
Vehicle: 2005 Subaru Baja Sport 2.5 H4 GAS
Master Cylinder
The master cylinder is of the tandem type design and incorporates a fast fill valve in order to improve the feeling on braking. It has a dual design which consists of a primary and a secondary brake system. If one brake system becomes inoperative, the other line will provide braking action. The master cylinder is designed into a "pierce" form so that ...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Power Brake Units -> Description
Vehicle: 2005 Subaru Baja Sport 2.5 H4 GAS
The brake booster is located inline between the master cylinder and the brake pedal. It serves to mechanically boost the force pushing the pistons of the master cylinder.
The brake booster consists of a power cylinder section and a power piston section. The power cylinder is made up of a front shell, rear shell and a diaphragm. The front and rear shells are connected with the diaphragm placed in between the two. The power cylinder chamber is closed to the atmosphere and the left and right chambers of the diaphragm are kept sealed.
The power piston is ...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Power Brake Units -> Description
Vehicle: 2005 Subaru Baja Turbo 2.5 H4 GAS
The brake booster is located inline between the master cylinder and the brake pedal. It serves to mechanically boost the force pushing the pistons of the master cylinder.
The brake booster consists of a power cylinder section and a power piston section. The power cylinder is made up of a front shell, rear shell and a diaphragm. The front and rear shells are connected with the diaphragm placed in between the two. The power cylinder chamber is closed to the atmosphere and the left and right chambers of the diaphragm are kept sealed.
The power piston is ...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Power Brake Units -> Diagnosis & Testing
Vehicle: 2005 Subaru Baja Sport 2.5 H4 GAS
Perform this procedure with the parking brakes applied.
- Start engine, then stop after one or two minutes of running time.
- Depress brake pedal several times with normal force.
- If pedal travel decreases the more times the brake pedal is depressed, the b...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Subaru Baja AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Subaru Baja cars and light trucks from 1990+.
Subaru -> Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 2005 Subaru Baja Sport 2.5 H4 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Disconnect brake hose from strut.
- Remove caliper lockpin, then rotate caliper on guide pin, Figs. through .
- Remove brake pads from support.
- Reverse procedure to install noting the following:
- Push piston into caliper body. When piston is difficult to insert, loosen the air bleeder, then push into place.
- Refer to Figs. through for tightening values.
- After completing installation, depress brake pedal several times to seat brake pads against rotor. If pedal stroke is excessive, bleed hydraulic ...
CLICK HERE TO GET FULL ACCESS TO 2005 Subaru Baja BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Subaru Baja vehicle.
|
| Access the Complete guide! |
