Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Toyota Avalon car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Toyota Avalon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Toyota Avalon
- 2005 Toyota Avalon XL 3.5 V6 GAS, CC:3456, Fuel Injection
- 2005 Toyota Avalon XLS 3.5 V6 GAS, CC:3456, Fuel Injection
- 2005 Toyota Avalon Limited 3.5 V6 GAS, CC:3456, Fuel Injection
- 2005 Toyota Avalon Touring 3.5 V6 GAS, CC:3456, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Caliper Service -> 2003-04 -> 2005 -> Avalon -> Camry, Camry Solara & Sienna -> Celica, Corolla & MR2 -> Highlander & RAV4 -> Land Cruiser, Sequoia & 4Runner -> Matrix -> Overhaul -> Replace
Vehicle: 2005 Toyota Avalon Touring 3.5 V6 GAS
Avalon
2003-04
Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Disconnect brake hose from brake tube and caliper using a suitable tool.
- Remove caliper attaching bolts, then the caliper, Fig. .
- Remove anti-squeal shim(s), brake pad, anti-rattle spring, pad guide plate and pad support plate.
- Reverse procedure to install, then bleed brake system.
Overhaul
- Remove sliding bushing and boot.
- Remove main pin boot using a suitable chisel.
- Remove piston using compressed air. When using air pressure to remove caliper piston, place a shop towel over piston to prevent it...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Front Disc Brakes -> Brake Pad Service -> 2WD -> 4Runner -> 4WD -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, Matrix, MR2 & Sienna -> Disc, Replace -> Echo & RAV4 -> Land Cruiser -> Sequoia & Tundra -> Tacoma
Vehicle: 2005 Toyota Avalon XLS 3.5 V6 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, Matrix, MR2 & Sienna
- Remove front wheel and reinstall lug nuts to locate disc temporarily.
- Remove caliper from torque plate and suspend so brake hose is not under tension. Do not disconnect brake hose.
- Refer to Figs. through , and remove the following components:
- Brake pads.
- Anti-squeal shims.
- Pad wear indicator plates.
- Support plates.
- Anti-squeal springs.
- Install new pad support plates.
- Install new pad wear indicator plates on each pad with arrow pointing in direction of disc rotation.
- Install new anti-squeal shims on each pad.
- I...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Front Disc Brakes -> Precautions -> Audio Coded Anti-Theft System
Vehicle: 2005 Toyota Avalon Limited 3.5 V6 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button, - - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit ...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Adjustments -> Brake Pedal Height & Freeplay
Vehicle: 2005 Toyota Avalon XL 3.5 V6 GAS
Brake Pedal Height & Freeplay
Refer to Fig. for pedal height and freeplay references.
- Loosen stop light switch, then the clevis locknut.
- Adjust pedal height by turning pushrod.
- Tighten locknut an...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 2005 Toyota Avalon Touring 3.5 V6 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Avalon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Avalon cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Brake Booster, Replace -> Except Sequoia, Sienna & Tundra -> Installation -> Removal -> Sequoia & Tundra -> Sienna
Vehicle: 2005 Toyota Avalon XLS 3.5 V6 GAS
Brake Booster, Replace
Except Sequoia, Sienna & Tundra
Removal
- Remove master cylinder as outlined under .
- Remove charcoal vapor canister as required.
- Remove brake booster vacuum hose.
- Remove pedal return spring, clip, clevis pin and clevis locknut, Fig. .
- Remove brake booster nuts. Pull out booster and gasket.
Installation
- Adjust length of booster pushrod as follows:
- Install gasket on master cylinder.
- Install brake booster pushrod gauge tool No. 09737-00010, or equivalent, on gasket.
- Lower pin until its tip slightly touches the piston.
- Turn gauge tool upside down and set it on boos...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Avalon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Toyota Avalon vehicle.
|
| Access the Complete guide! |
