Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Toyota Sienna car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Toyota Sienna automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Toyota Sienna
- 2005 Toyota Sienna CE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2005 Toyota Sienna LE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2005 Toyota Sienna XLE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2005 Toyota Sienna XLE Limited 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Parking Brake Service -> Avalon, Camry, Camry Solara, Celica, Highlander & RAV4 -> Corolla & Matrix -> Land Cruiser, Sequoia, Sienna & 4Runner -> Shoes, Replace
Vehicle: 2005 Toyota Sienna XLE 3.3 V6 GAS
Avalon, Camry, Camry Solara, Celica, Highlander & RAV4
Shoes, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove rear caliper.
- Remove rotor disc.
- Remove shoe return springs, Figs. and .
- Remove shoe strut and spring using strut remover 09717-20010, or equivalent.
- Slide front shoe from under shoe hold-down spring, then remove shoe adjusting screw, tension spring and remove shoe.
- Slide rear from shoe hold-down spring, then disconnect parking brake cable from shoe lever.
- Apply non-melting grease on brake backing plate shoe flats, then on shoe slidin...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Parking Brake Service -> Avalon, Camry, Camry Solara, Celica, Highlander & RAV4 -> Corolla & Matrix -> Land Cruiser, Sequoia, Sienna & 4Runner -> Shoes, Replace
Vehicle: 2005 Toyota Sienna XLE Limited 3.3 V6 GAS
Avalon, Camry, Camry Solara, Celica, Highlander & RAV4
Shoes, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove rear caliper.
- Remove rotor disc.
- Remove shoe return springs, Figs. and .
- Remove shoe strut and spring using strut remover 09717-20010, or equivalent.
- Slide front shoe from under shoe hold-down spring, then remove shoe adjusting screw, tension spring and remove shoe.
- Slide rear from shoe hold-down spring, then disconnect parking brake cable from shoe lever.
- Apply non-melting grease on brake backing plate shoe flats, then on shoe slidin...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Tightening Specifications
Vehicle: 2005 Toyota Sienna CE 3.3 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Except Sienna -> Inspection -> Master Cylinder -> Overhaul -> Sienna -> Wheel Cylinders
Vehicle: 2005 Toyota Sienna LE 3.3 V6 GAS
Master Cylinder
Except Sienna
Disassemble
For the following procedures, refer to Fig. for assistance.
- Remove master cylinder boot.
- Remove setscrew and reservoir tank, then the cap and strainer from reservoir.
- Remove two grommets and place cylinder in vise.
- Push piston in and remove stopper bolt, Fig. .
- Push pistons in and remove snap ring, then No. 1 piston carefully by hand.
- Place cylinder on edges of two wooden blocks and tap on cylinder until No. 2 piston comes out.
Inspection
Clean components with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear or ...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Brake Booster, Replace -> Except Sequoia, Sienna & Tundra -> Installation -> Removal -> Sequoia & Tundra -> Sienna
Vehicle: 2005 Toyota Sienna XLE 3.3 V6 GAS
Brake Booster, Replace
Except Sequoia, Sienna & Tundra
Removal
- Remove master cylinder as outlined under .
- Remove charcoal vapor canister as required.
- Remove brake booster vacuum hose.
- Remove pedal return spring, clip, clevis pin and clevis locknut, Fig. .
- Remove brake booster nuts. Pull out booster and gasket.
Installation
- Adjust length of booster pushrod as follows:
- Install gasket on master cylinder.
- Install brake booster pushrod gauge tool No. 09737-00010, or equivalent, on gasket.
- Lower pin until its tip slightly touches the piston.
- Turn gauge tool upside down and set it on boos...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Sienna AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Sienna cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Troubleshooting
Vehicle: 2005 Toyota Sienna CE 3.3 V6 GAS
Refer to Fig. for gener...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Sienna BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Toyota Sienna vehicle.
|
| Access the Complete guide! |
