Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Acura RL car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Acura RL automobile. Try the Automotix DIY solution today!
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Identification
Vehicle: 2006 Acura RL 3.5 V6 GAS
If the TPMS indicator begins to flash for approximately one minute and then stays On, a problem in the TPMS system is indicated. A CHECK TPMS SYSTEM message will also appear in the multi-information display.
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to ...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Less Scan Tool -> With Scan Tool
Vehicle: 2006 Acura RL 3.5 V6 GAS
When replacing the TPMS control unit, use a scan tool to memorize sensor IDs.
Less Scan Tool
After rotating the tires or replacing a tire pressure sensor, drive vehicle for at least 40 seconds at a speed of 15 mph or more. All sensor ID's will be memorized automatically. If replacing a tire pressure sensor, ensure vehicle is at least 10 feet from any tire pressure sensor not installed on vehicle.
After the IDs have been memorized, reduce the pressure in all four tires to less than the recommended specification, then check to see that the four tire indicators come On. After compl...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2006 Acura RL 3.5 V6 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2006 Acura RL 3.5 V6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures -> Resetting PAX System Warning -> TPMS Lamp
Vehicle: 2006 Acura RL 3.5 V6 GAS
TPMS Lamp
The low tire pressure warning lamp will illuminate briefly as a bulb check when the ignition switch is placed in the On position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. If low tire pressure is detected, the low tire pressure warning lamp will illuminate along with the appropriate tire indicator shown on the multi-information display. Adjusting tire to recommended pressure will turn lamp off.
If the TPMS indicator begins to flash for approximately one minute and then stays On, a problem in the TPMS system is indicated. A ...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Front -> Installation -> Rear -> Removal -> Tire Pressure Sensor -> TPMS Control Unit -> TPMS Initiator
Vehicle: 2006 Acura RL 3.5 V6 GAS
Tire Pressure Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Remove the valve cap and core.
- Deflate the tire completely.
- Remove any balance weights.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Do outside of wheel first.
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Do not position the bead breaker of the tire changer too close to the rim.
- Position the wheel so the tire machine and tire iron are next to the valve stem an...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
