Auto Parts Search
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2006 Acura TL 3.2 V6 GAS
The TPMS (Tire Pressure Monitor System) alerts the driver when a large change in the pressure of one tire exists. The system detects a tire pressure condition while the vehicle is in motion, once a tire pressure condition is detected, the system alerts the driver whenever ...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Front -> Installation -> Rear -> Removal -> Tire Pressure Sensor -> TPMS Control Unit -> TPMS Initiator
Vehicle: 2006 Acura TL 3.2 V6 GAS
Tire Pressure Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Remove the valve cap and core.
- Deflate the tire completely.
- Remove any balance weights.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Do outside of wheel first.
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Do not position the bead breaker of the tire changer too close to the rim.
- Position the wheel so the tire machine and tire iron are next to the valve stem an...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Less Scan Tool -> With Scan Tool
Vehicle: 2006 Acura TL 3.2 V6 GAS
When replacing the TPMS control unit, use a scan tool to memorize sensor IDs.
Less Scan Tool
After rotating the tires or replacing a tire pressure sensor, drive vehicle for at least 40 seconds at a speed of 15 mph or more. All sensor ID's will be memorized automatically. If replacing a tire pressure sensor, ensure vehicle is at least 10 feet from any tire pressure sensor not installed on vehicle.
After the IDs have been memorized, reduce the pressure in all four tires to less than the recommended specification, then check to see that the four tire indicators come On. After compl...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2006 Acura TL 3.2 V6 GAS
The low tire pressure warning lamp will illuminate briefly as a bulb check when the ignition switch is placed in the On position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. If low tire pressure is detected, the low tire pressure warning lamp will illuminate along with the appropriate ti...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2006 Acura TL 3.2 V6 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Acura TL AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Acura TL cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2006 Acura TL 3.2 V6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Acura TL vehicle. |
Access the Complete guide! |