Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Chevrolet Impala car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Chevrolet Impala automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Chevrolet Impala
- 2006 Chevrolet Impala LS 3.5 V6 FLEX, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:K
- 2006 Chevrolet Impala SS 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:C
- 2006 Chevrolet Impala LT 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
- 2006 Chevrolet Impala LT 3.5 V6 FLEX, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:K
- 2006 Chevrolet Impala LTZ 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
- 2006 Chevrolet Impala LS 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Anti-Lock Warning Lamp ->
Vehicle: 2006 Chevrolet Impala LS 3.5 V6 FLEX
This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When lamp is lit, turn ignition Off, then restart engine. If l...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Reduce Engine Power Indicator Lamp ->
Vehicle: 2006 Chevrolet Impala LS 3.5 V6 FLEX
The Reduce Engine Power indicator lamp should light for a approximately 3 seconds when the ignition is turned on as a bulb check. If the warning lamp turns on during vehicle operation, a vehicl...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Engine Or Service Now Soon Engine Indicator Lamps (Gasoline Engines w/Electronic Engine Controls Or EFI) -> Except LeMans, Metro, Prizm, Storm & Vibe
Vehicle: 2006 Chevrolet Impala LS 3.9 V6 GAS
The Check Engine lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a fault condition and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM memory can be cleared of codes as follows:
On models except Cadillac with DEFI, remove the ECM/PCM fuse or disconnect the battery ground cable for approximately 30...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Active Handling System Warning Lamp ->
Vehicle: 2006 Chevrolet Impala LTZ 3.9 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned on as a bulb check. The lamp will also come on as the system is...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
Vehicle: 2006 Chevrolet Impala LTZ 3.9 V6 GAS
The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Chevrolet Impala AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Chevrolet Impala cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2006-07 Impala -> Relearn -> Reset
Vehicle: 2006 Chevrolet Impala LT 3.9 V6 GAS
Reset
When the TPMS detects a significant loss, or gain of tire pressure, the CHECK TIRE PRESSURE message is displayed on the DIC. Adjusting tire to recommended pressure will clear the tire message.
Relearn
If using the pressure increase decrease method, the procedure must be completed within 15 minutes from when the vehicle was driven at a speed of 20 mph or greater for 10 seconds.
- Place the ignition switch in the ACC position.
- Press the keyless entry transmitter lock and unlock buttons at the same time until the horn emits a chirp sound. If the horn does not chirp with in 15 seconds...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Impala MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Chevrolet Impala vehicle.
|
| Access the Complete guide! |
