Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Dodge Dakota car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Dodge Dakota automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Dodge Dakota
- 2006 Dodge Dakota ST 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2006 Dodge Dakota ST 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2006 Dodge Dakota SLT 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2006 Dodge Dakota SLT 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2006 Dodge Dakota SLT 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:J
- 2006 Dodge Dakota Laramie 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
- 2006 Dodge Dakota Laramie 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2006 Dodge Dakota Laramie 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Dodge Dakota SLT 4.7 V8 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Dodge Dakota ST 3.7 V6 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Dodge Dakota SLT 3.7 V6 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Dodge Dakota ST 4.7 V8 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Dodge Dakota Laramie 3.7 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove skid plate, if equipped.
- Remove cotter pin, nut lock, and spring washer from stub shaft.
- Remove hub nut and washer from stub shaft.
- Remove brake caliper and rotor.
- Remove ABS wheel speed sensor, if equipped.
- Remove hub bearing bolts and hub bearing fr...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Dodge Dakota cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Dodge Dakota SLT 4.7 V8 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove skid plate, if equipped.
- Remove cotter pin, nut lock, and spring washer from stub shaft.
- Remove hub nut and washer from stub shaft.
- Remove brake caliper and rotor.
- Remove ABS wheel speed sensor, if equipped.
- Remove hub bearing bolts and hub bearing fr...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
