Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Ford F-150 car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Ford F-150 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Ford F-150
- 2006 Ford F-150 STX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2006 Ford F-150 STX 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2006 Ford F-150 XL 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2006 Ford F-150 XL 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2006 Ford F-150 XL 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 XL 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2006 Ford F-150 XLT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2006 Ford F-150 XLT 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2006 Ford F-150 XLT 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 XLT 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2006 Ford F-150 FX4 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 FX4 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2006 Ford F-150 King Ranch 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 King Ranch 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2006 Ford F-150 Lariat 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 HARLEY-DAVIDSON Edition 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2006 Ford F-150 HARLEY-DAVIDSON Edition 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2006 Ford F-150 XLT 4.2 V6 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2006 Ford F-150 HARLEY-DAVIDSON Edition 5.4 V8 FLEX
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2006 Ford F-150 HARLEY-DAVIDSON Edition 5.4 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2006 Ford F-150 XL 4.6 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2006 Ford F-150 King Ranch 5.4 V8 FLEX
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Ford F-150 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Ford F-150 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2006 Ford F-150 STX 4.2 V6 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford F-150 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
