Auto Parts Search

We have info for following modifications of 2006 GMC Savana 3500
- 2006 GMC Savana 3500 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
- 2006 GMC Savana 3500 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 GMC Savana 3500 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:2
- 2006 GMC Savana 3500 LT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 GMC Savana 3500 LS 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit, Replace -> Astro, Avalanche, Escalade EXT, Safari, Sierra, Silverado & SSR -> Aztek & Rendezvous -> Blazer, Bravada, Envoy, Jimmy, Rainier & Trailblazer -> Canyon, Colorado, Sonoma & S10 -> Equinox & Torrent -> Escalade, HHR, Suburban, Tahoe & Yukon -> Express & Savana -> Hummer H2 -> Hummer H3 -> Montana, Silhouette & Venture -> Relay, Terraza, SV6 & Uplander -> SRX -> Vue
Vehicle: 2006 GMC Savana 3500 LS 6.0 V8 GAS
Aztek & Rendezvous
- Remove coolant reservoir, then relieve fuel system pressure as follows:
- Loosen fuel filler cap to discharge tank pressure.
- Connect fuel pressure gauge tool No. J-34730-1A, or equivalent, to fuel pressure connection. Wrap shop towel around connection while connecting fuel pressure gauge in order to avoid fuel spillage.
- Install bleed hose into an approved container and open valve in order to bleed fuel system pressure.
- Drain any fuel remaining in fuel pressure gauge into suitable container.
- Remove cruise control cable from module, then disconnect electrical ...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 2006 GMC Savana 3500 4.8 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect and ...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Installation -> Removal
Vehicle: 2006 GMC Savana 3500 6.0 V8 GAS
Removal
- Siphon 2/3 of the brake fluid from master cylinder.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Compress caliper pistons until they bottom in bores using suitable clamp, Fig. .
- Disconnect brake hose at caliper by removing inlet fitting bolt.
- Remove mounting bolts and caliper.
Inspection
Should it become required to remove the caliper for installation of new components, clean components in denatured alcohol, wipe dry using lint-free cloths. Blow out drilled passages and holes using compressed air. Inspect dust boots for punctures or tears. If punctures or tears are...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 2006 GMC Savana 3500 4.8 V8 GAS
Delco Master Cylinder
When performing the following procedures, refer to Figs. and , noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet ...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Description
Vehicle: 2006 GMC Savana 3500 6.0 V8 GAS
The caliper mounts in a way that allows the caliper to move laterally inboard as the brake pads wear. The caliper housing is a one piece casting with the inboard side containing the piston bore. The piston seal also acts as a return mechanism for the piston.
Applying the brake pedal causes the hydraulic pressure that moves the caliper piston. The piston then forces the inboard brake pad against the inboard braking surface of the rotor. Increasing the force against...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Savana 3500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Savana 3500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 2006 GMC Savana 3500 6.0 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect and ...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Savana 3500 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |