Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Isuzu I-280 car and truck
repair procedures including Isuzu engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Isuzu I-280 automobile. Try the Automotix DIY solution today!
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Isuzu I-280 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Isuzu I-280 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Isuzu I-280 2.8 L4 GAS
- Disconnect battery ground cable.
- Rotate or lift belt tensioner arm clockwise using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Raise vehicle on lift.
- Remove lefthand front wheel.
- Remove push-pins securing lefthand wheel housing liner.
- Disconnect A/C compressor clutch connector.
- Remove A/C compressor mounting bolts. Remove two lower bolts and one upper bolt ONLY. Evacuation of A/C refrigerant is not required. One upper mounting bolt will secure A/C compressor.
- Lower vehicle to ground.
- Remove alternator electrical connector and terminal nut from back of alter...
CLICK HERE TO GET FULL ACCESS TO 2006 Isuzu I-280 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Isuzu I-280 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Isuzu I-280 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Isuzu I-280 2.8 L4 GAS
- Disconnect battery ground and positive cables.
- Remove intake manifold by following steps below.
- Remove battery box wiring harness retainers.
- Lift lower battery box upward from battery tray.
- Remove oil dipstick from tube then remove bolt securing oil dipstick tube.
- Remove oil dipstick tube from engine oil pan.
- Disconnect brake booster hose from brake booster.
- Disconnect manifold absolute pressure sensor connector.
- Disconnect MAP sensor wiring harness retainers from intake manifold.
- Disconnect PVC valve and air tube from camshaft cover.
- Remove alternator assembly.
- Disconnect engine wiring h...
CLICK HERE TO GET FULL ACCESS TO 2006 Isuzu I-280 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



