2006 KIA RIO Driveline U-Joint & CV Axles Replacement

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 KIA RIO car and truck repair procedures including KIA engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2006 KIA RIO automobile. Try the Automotix DIY solution today!

DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2006 KIA RIO

2006 KIA RIO 1.6 L4 GAS, CC:1599, Fuel Injection
2006 KIA RIO LX 1.6 L4 GAS, CC:1599, Fuel Injection

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 KIA RIO AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 KIA RIO cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2006 KIA RIO LX 1.6 L4 GAS

Raise and support vehicle and support it with safety stands in proper locations.
Remove wheel nuts and front wheels.
Remove drain plug and drain transaxle fluid in suitable container.
Remove driveshaft cotter pin, castle nut and washer from front hub.
Disconnect tie rod end ball joint from steering knuckle using suitable tool.
Remove bolts securing wheel speed sensor from steering knuckle.
Remove ball joint assembly mounting bolt from knuckle.
Tap on driveshaft front hub assembly using plastic hammer.
Push front hub assembly outward and separate driveshaft from hub assembly.
Inser...

CLICK HERE TO GET FULL ACCESS TO 2006 KIA RIO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 KIA RIO AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 KIA RIO cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2006 KIA RIO 1.6 L4 GAS

Raise and support vehicle and support it with safety stands in proper locations.
Remove wheel nuts and front wheels.
Remove drain plug and drain transaxle fluid in suitable container.
Remove driveshaft cotter pin, castle nut and washer from front hub.
Disconnect tie rod end ball joint from steering knuckle using suitable tool.
Remove bolts securing wheel speed sensor from steering knuckle.
Remove ball joint assembly mounting bolt from knuckle.
Tap on driveshaft front hub assembly using plastic hammer.
Push front hub assembly outward and separate driveshaft from hub assembly.
Inser...

CLICK HERE TO GET FULL ACCESS TO 2006 KIA RIO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts

Auto Repair Quick Search

Help me find

Search DIY repair manuals by VIN...

Get the Complete Technical Service Bulletins!

Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 KIA RIO vehicle.