Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Mercury Montego car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Mercury Montego automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Mercury Montego
- 2006 Mercury Montego Premier 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2006 Mercury Montego Luxury 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Inspection -> Master Cylinder -> Wheel Cylinders
Vehicle: 2006 Mercury Montego Premier 3.0 V6 GAS
Master Cylinder
Disassemble
- Clean outside of master cylinder thoroughly. Drain brake fluid from master cylinder into suitable container.
- Remove stop bolt and pressure control valves.
- Pry up and remove reservoir from master cylinder body.
- Remove fluid control valve.
- Depress primary piston and remove snap ring from retaining groove at open end of bore.
- Remove primary and secondary piston assemblies from master cylinder. If secondary piston does not come out, apply air pressure to secondary outlet port to remove.
Inspection
- Wash components in clean brake fluid only. Use an air hose to bl...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 2006 Mercury Montego Luxury 3.0 V6 GAS
Pressure bleeding is recommended for all hydraulic disc brake systems.
Do not reuse brake fluid drained from the hydraulic system when bleeding the brakes. Ensure disc brake pistons are returned to their normal positions and the shoe and lining assemblies are properly seated.
Do not shake the pressure bleeder tank while air is being added or after it has been pressurized. This will prevent air from the tank getting into the lines. Do not move the tank during the bleeding operation. The tank should be kept at least one third full.
On models equipped with power brakes, exhaust the...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Precautions -> System Depressurizing
Vehicle: 2006 Mercury Montego Premier 3.0 V6 GAS
System Depressurizing
On models equipped with anti-lock brakes, hydraulic system must be depressurized prior to ...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Rotor, Replace -> Crown Victoria, Grand Marquis, Marauder & Town Car -> Five Hundred, Freestyle, Fusion, Milan, MKZ, Montego, Mustang, Sable, Taurus & Zephyr -> Installation -> LS & Thunderbird -> Removal
Vehicle: 2006 Mercury Montego Premier 3.0 V6 GAS
Five Hundred, Freestyle, Fusion, Milan, MKZ, Montego, Mustang, Sable, Taurus & Zephyr
Removal
- Remove rear disc brake caliper as outlined under . Do not disconnect flexible hose unless caliper requires service.
- Support caliper with suitable wire or tie strap so flexible hose is not stretched or twisted.
- Remove rear disc support bracket to wheel knuckle bolts.
- Remove rear disc support bracket and brake shoes and linings.
- Remove two nuts and rotor.
Installation
- If installing new rotor, remove protective coating from rotor with suitable carburetor cleaner.
- Lubricate rear hub pilot diameter wi...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Brake Pad Service -> Crown Victoria, Grand Marquis, Marauder & Town Car -> Five Hundred, Freestyle, Fusion Milan, MKZ, Montego, Mustang, Sable, Taurus & Zephyr -> Installation -> LS & Thunderbird -> Removal
Vehicle: 2006 Mercury Montego Luxury 3.0 V6 GAS
On models with anti-lock brakes, the brake system power booster must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal at least 25 times with the ignition in the Off position.
After performing any service work, obtain a firm brake pedal before moving the vehicle.
Five Hundred, Freestyle, Fusion Milan, MKZ, Montego, Mustang, Sable, Taurus & Zephyr
Removal
- On models equipped with air suspension, turn service switch Off position.
- On all models, raise and support rear of vehicle, then remove tire and wheel assembly...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Mercury Montego AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Mercury Montego cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Flush
Vehicle: 2006 Mercury Montego Premier 3.0 V6 GAS
Whenever new brake components are installed in the hydraulic system, it is recommended that the entire hydraulic system be thoroughly flushed with clean brake fluid.
It may sometime become required to flush out the system due to the presence of mineral oil, kerosene, gasoline, etc., which will cause swelling of rubber piston cups and valves and render them inoperative.
Flushing is performed at e...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Montego BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Mercury Montego vehicle.
|
| Access the Complete guide! |
