Auto Parts Search
We have info for following modifications of 2006 Nissan Altima
- 2006 Nissan Altima 2.5 L4 GAS, CC:2500, Fuel Injection
- 2006 Nissan Altima S 2.5 L4 GAS, CC:2500, Fuel Injection
- 2006 Nissan Altima SL 2.5 L4 GAS, CC:2500, Fuel Injection
- 2006 Nissan Altima SL 3.5 V6 GAS, CC:3498, Fuel Injection
- 2006 Nissan Altima SE-R 3.5 V6 GAS, CC:3498, Fuel Injection
- 2006 Nissan Altima SE 3.5 V6 GAS, CC:3498, Fuel Injection
- 2006 Nissan Altima S 3.5 V6 GAS, CC:3498, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Traction Control/Slip Indicator Lamp ->
Vehicle: 2006 Nissan Altima S 3.5 V6 GAS
Drive wheel slippage is detected by the four wheel rotating signal. When wheel slip becomes excessive, the Traction Control System (TCS) operates causing the SLIP indicator lamp to illuminate. When the TCS off switch is used to cancel TCS function, the ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Malfunction Indicator Lamp (MIL) -> 2001-06
Vehicle: 2006 Nissan Altima SE 3.5 V6 GAS
The MIL will illuminate to indicate that a system fault has been detected. The MIL will blink simultaneously with the red Light Emitting Diode (LED) on the Electronic Control Module (ECM). Following diagnosis and repair of all system faults, reset the MIL lamp. The DTCs can be cleared by placing the ignition switch in the off position. After approximately 10 seconds, place ignition switch in the on position engine not running. Depress the accelerator pedal to change from Mode II to Mode I. Place ignition switch in off position....
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Anti-Lock Warning Lamp -> 1993-2006 Altima
Vehicle: 2006 Nissan Altima S 3.5 V6 GAS
This lamp will be illuminated when the ignition switch is placed in the on position as a bulb check. If the lamp remains lit or lights during vehicle operation, a problem in the anti-lock brake/traction control system is indicated. When the lamp is lit, place the ignition switch in the off position, then restart the engine. If the lamp remains lit, the system must be serviced. The basic brake system will remain functional. After servicing the system, proceed as follows:
- On 1993-99 models, locate the DLC located behind instrument panel fuse panel cover.
- On 2000-06 models, locate t...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Air Bag Warning Lamp ->
Vehicle: 2006 Nissan Altima S 3.5 V6 GAS
When the ignition key is placed in the on or Start positions, the air bag warning lamp will illuminate for approximately 7 seconds, then turn off. This lamp cycle indica...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Air Bag Warning Lamp ->
Vehicle: 2006 Nissan Altima SL 3.5 V6 GAS
When the ignition key is placed in the on or Start positions, the air bag warning lamp will illuminate for approximately 7 seconds, then turn off. This lamp cycle indica...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Nissan Altima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Nissan Altima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Traction Control/Slip Indicator Lamp ->
Vehicle: 2006 Nissan Altima SL 2.5 L4 GAS
Drive wheel slippage is detected by the four wheel rotating signal. When wheel slip becomes excessive, the Traction Control System (TCS) operates causing the SLIP indicator lamp to illuminate. When the TCS off switch is used to cancel TCS function, the ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Altima MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Nissan Altima vehicle. |
Access the Complete guide! |