Auto Parts Search
We have info for following modifications of 2006 Nissan Pathfinder
- 2006 Nissan Pathfinder LE 4.0 V6 GAS, CC:3954, Fuel Injection
- 2006 Nissan Pathfinder SE 4.0 V6 GAS, CC:3954, Fuel Injection
- 2006 Nissan Pathfinder SE OFF-ROAD 4.0 V6 GAS, CC:3954, Fuel Injection
- 2006 Nissan Pathfinder S 4.0 V6 GAS, CC:3954, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder SE 4.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove ABS sensor harness from mount on knuckle, then disconnect wheel sensor harness connector.Do not pull on wheel sensor harness during removal of ABS sensor. Carefully feed ABS wheel sensor harness through hole in splash shield.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is re...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder SE 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 98 ft. lbs.
- Torque driveline to pinion flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder LE 4.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove ABS sensor harness from mount on knuckle, then disconnect wheel sensor harness connector.Do not pull on wheel sensor harness during removal of ABS sensor. Carefully feed ABS wheel sensor harness through hole in splash shield.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is re...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder SE OFF-ROAD 4.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove ABS sensor harness from mount on knuckle, then disconnect wheel sensor harness connector.Do not pull on wheel sensor harness during removal of ABS sensor. Carefully feed ABS wheel sensor harness through hole in splash shield.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is re...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder S 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 98 ft. lbs.
- Torque driveline to pinion flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Pathfinder AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Pathfinder cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Pathfinder SE OFF-ROAD 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 98 ft. lbs.
- Torque driveline to pinion flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Pathfinder DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Nissan Pathfinder vehicle. |
Access the Complete guide! |