Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Pontiac G6 car and truck
repair procedures including Pontiac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Pontiac G6 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Pontiac G6
- 2006 Pontiac G6 3.5 V6 GAS, CID:214, Fuel Injection, Aspiration:214, Engine VIN:, Desg:8
- 2006 Pontiac G6 2.4 L4 GAS, CC:2384, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2006 Pontiac G6 GTP 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
- 2006 Pontiac G6 GT 3.5 V6 GAS, CID:214, Fuel Injection, Aspiration:214, Engine VIN:, Desg:8
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2006 Pontiac G6 GT 3.5 V6 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Remove righthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Loop a suitable rope around upper two tabs of condenser, then tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support br...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2006 Pontiac G6 GTP 3.9 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove evaporator hose assembly.
- Remove condenser tube.
- Reposition heater hose inlet clamp at heater core using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine using hose clamp pliers J 38185 or equivalent.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2006 Pontiac G6 2.4 L4 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove evaporator hose assembly.
- Remove condenser tube.
- Reposition heater hose inlet clamp at heater core using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine using hose clamp pliers J 38185 or equivalent.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2006 Pontiac G6 3.5 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove evaporator hose assembly.
- Remove condenser tube.
- Reposition heater hose inlet clamp at heater core using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine using hose clamp pliers J 38185 or equivalent.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2006 Pontiac G6 GT 3.5 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from thermostat housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from thermostat housing.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator and from vehicle.
- Reverse procedure to ...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Pontiac G6 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Pontiac G6 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2006 Pontiac G6 GTP 3.9 V6 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Remove righthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Loop a suitable rope around upper two tabs of condenser, then tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support br...
CLICK HERE TO GET FULL ACCESS TO 2006 Pontiac G6 RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
