Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Saab 9-3 car and truck
repair procedures including Saab engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Saab 9-3 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Saab 9-3
- 2006 Saab 9-3 Aero 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2006 Saab 9-3 2.0T 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:Y
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Low Fuel Level Warning Lamp ->
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
When fuel tank fuel level falls below 2.64 gallons, the low fuel level warning lamp illumin...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Automatic Transmission (A/T) Fluid Temperature Indicator ->
Vehicle: 2006 Saab 9-3 Aero 2.8 V6 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in on position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the road and allowed to idle with transmission lever in Park until the lamp goes off. If the lamp goes off vehicle can ...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Check Engine Lamp -> 1999-2009 9-3 & 9-5
Vehicle: 2006 Saab 9-3 Aero 2.8 V6 GAS
The Check Engine lamp will be illuminated when the ignition switch is in the on position with engine not running. When the engine is started, the lamp should go out. If the lamp remains lit, a diagnostic trouble code has been stored by the PCM. After diagnosis and repair are complete, to clear DTCs use a suitable scan tool. Follow scan tool manufacturers instructions.
If a misfire condition which may cause damage to the c...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Check Engine Lamp -> 1999-2009 9-3 & 9-5
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
The Check Engine lamp will be illuminated when the ignition switch is in the on position with engine not running. When the engine is started, the lamp should go out. If the lamp remains lit, a diagnostic trouble code has been stored by the PCM. After diagnosis and repair are complete, to clear DTCs use a suitable scan tool. Follow scan tool manufacturers instructions.
If a misfire condition which may cause damage to the c...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Engine Oil Life Monitor -> 9-3 & 9-5
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
- Turn ignition On, but do not start engine.
- Press Information and Reset buttons on DIC (Driver Information Center) at same time to enter personalization menu.
- Press information b...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Saab 9-3 cars and light trucks sold in the U.S. from 1990+.
Saab -> Air Bag Warning Lamp ->
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
The air bag warning lamp informs the driver when a fault occurs in the air bag system. If a fault is detected, then air bag warning...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Saab 9-3 vehicle.
|
| Access the Complete guide! |
