Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Subaru Legacy car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Subaru Legacy automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Subaru Legacy
- 2006 Subaru Legacy GT 2.5 H4 GAS, CC:2458, Fuel Injection
- 2006 Subaru Legacy 2.5I 2.5 H4 GAS, CC:2458, Fuel Injection
- 2006 Subaru Legacy GT Spec.b 2.5 H4 GAS, CC:2458, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2006-09 Legacy & Outback -> Relearn -> Reset -> Transmitter ID Registration
Vehicle: 2006 Subaru Legacy 2.5I 2.5 H4 GAS
Reset
This warning lamp will illuminate when tire pressure falls below a specified psi. When the warning lamp illuminates, check the air pressure of the tire and adjust it to specified pressure. When the vehicle is driven more than 20 mph after the tire pressure adjustment, the lamp will go off.
Relearn
Transmitter ID Registration
The following procedure must be performed when tire pressure sensor or TPMS control module is replaced. If tire pressure sensor transmitter ID cannot be registered after two attempts, replace the TPMS control module. If the registration procedure ...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Check Engine Lamp -> 1995-2009 Legacy & Outback
Vehicle: 2006 Subaru Legacy GT 2.5 H4 GAS
The Check Engine lamp will be illuminated when the ignition switch is placed in the On position. When the engine is started, the lamp should go out. If it remains lit after engine start-up, the self-diagnostic system has detected a problem and stored a diagnostic trouble code. After diagnosis and repair are complete, the self-diagnostic system memory can be cleared using the scan tool. Follow sc...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 Subaru Legacy GT Spec.b 2.5 H4 GAS
The MIL will be illuminated when the ignition switch is placed in the On position, and should go out when the engine is started. If the MIL remains lit after engine start-up, the self-diagnostic system has detected a fault an...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Anti-Lock Brake System (ABS)/Traction Control System (TCS) Indicator -> 2005-09 Legacy & Outback
Vehicle: 2006 Subaru Legacy GT 2.5 H4 GAS
The Anti-Lock Brake/Traction Control System lamp will be illuminated when the ignition switch is in the On position with engine not running. When the engine is started, the lamp sho...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Driver Control Center Differential Indicator Lamps ->
Vehicle: 2006 Subaru Legacy GT 2.5 H4 GAS
The Driver Control Center Differential Indicator lamps show the current differential limiting factor of the center differential. The bottom indicator lamp will flash if a...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Subaru Legacy AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Subaru Legacy cars and light trucks sold in the U.S. from 1990+.
Subaru -> Automatic Transmission (A/T) Fluid Temperature Indicator ->
Vehicle: 2006 Subaru Legacy 2.5I 2.5 H4 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in On position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the road and allowed to idle with transmission lever in Park until the lamp goes off. If the lamp goes off vehicle can ...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru Legacy MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
