Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Toyota 4runner car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Toyota 4runner automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Toyota 4runner
- 2006 Toyota 4runner Limited 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2006 Toyota 4runner Limited 4.0 V6 GAS, CC:3956, Fuel Injection
- 2006 Toyota 4runner Sport 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2006 Toyota 4runner Sport 4.0 V6 GAS, CC:3956, Fuel Injection
- 2006 Toyota 4runner SR5 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2006 Toyota 4runner SR5 4.0 V6 GAS, CC:3956, Fuel Injection
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Toyota 4runner Limited 4.7 V8 GAS
- Discharge fuel system pressure.
- Position vehicle on lift and ensure transaxle is in neutral position.
- Disconnect battery ground cable
- Drain engine coolant from radiator.
- Remove nuts and throttle body cover subassembly.
- Remove air cleaner hose intake clamps and disconnect MAP sensor connector, and remove bolts securing housing assembly.
- Disconnect fuel hoses at clamps. Drain fuel from line into an suitable container to catch fuel.
- Disconnect fuel vapor feed hose assembly.
- Disconnect fuel injector connectors.
- Disconnect throttle position sensor connector.
- Disconnect coolant temperature sen...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Toyota 4runner Limited 4.7 V8 GAS
- Disconnect battery ground cable.
- Raise vehicle on suitable lift.
- Remove clips and radiator upper support seal.
- Rotate or lift belt tensioner arm counterclockwise using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Separate oil cooler hoses from fan shroud.
- Remove bolts and separate fan shroud from radiator.
- Remove nuts and separate fan with fluid coupling from engine.
- Remove fan shroud and fan with fluid coupling from vehicle at same time.
- Disconnect vacuum hose.
- Remove nut and bolts securing power steering pump assembly. Do not disconnect power st...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Toyota 4runner Sport 4.7 V8 GAS
- Disconnect battery ground cable.
- Raise vehicle on suitable lift.
- Remove clips and radiator upper support seal.
- Rotate or lift belt tensioner arm counterclockwise using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Separate oil cooler hoses from fan shroud.
- Remove bolts and separate fan shroud from radiator.
- Remove nuts and separate fan with fluid coupling from engine.
- Remove fan shroud and fan with fluid coupling from vehicle at same time.
- Disconnect vacuum hose.
- Remove nut and bolts securing power steering pump assembly. Do not disconnect power st...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Toyota 4runner SR5 4.7 V8 GAS
- Discharge fuel system pressure.
- Position vehicle on lift and ensure transaxle is in neutral position.
- Disconnect battery ground cable
- Drain engine coolant from radiator.
- Remove nuts and throttle body cover subassembly.
- Remove air cleaner hose intake clamps and disconnect MAP sensor connector, and remove bolts securing housing assembly.
- Disconnect fuel hoses at clamps. Drain fuel from line into an suitable container to catch fuel.
- Disconnect fuel vapor feed hose assembly.
- Disconnect fuel injector connectors.
- Disconnect throttle position sensor connector.
- Disconnect coolant temperature sen...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Toyota 4runner Limited 4.0 V6 GAS
- Disconnect battery cables.
- Remove nuts from battery bracket mount and then remove battery.
- Remove nuts securing v-bank cover.
- Raise vehicle on suitable lift.
- Remove bolts securing engine under cover subassembly.
- Rotate or lift belt tensioner arm counterclockwise using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Remove bolt from wiring harness stay mount.
- Disconnect electrical connector from alternator assembly.
- Remove alternator terminal nut cap and then nut.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Toyota 4runner AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Toyota 4runner cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Toyota 4runner Limited 4.0 V6 GAS
- Position vehicle on lift and ensure transaxle is in neutral position.
- Disconnect battery ground cable.
- Raise vehicle on suitable lift.
- Remove bolts from engine rear under cover assembly then remove under cover.
- On models equipped with 2WD, remove bolts and separate engine wiring harness.
- On models equipped with 4WD, disconnect bank two heated oxygen sensor connector.
- Remove bolts, nuts and gaskets securing front exhaust pipe assembly.
- Remove clips securing lefthand rear splash shield then remove splash shield.
- Loosen bolt upper bolt securing steering intermediate shaft subassembly a...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota 4runner STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
