Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Toyota Sienna car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Toyota Sienna automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Toyota Sienna
- 2006 Toyota Sienna CE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2006 Toyota Sienna LE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2006 Toyota Sienna XLE 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2006 Toyota Sienna Limited 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Engine Oil Reminder/Maintenance Required Lamp -> 2004-09 Sienna
Vehicle: 2006 Toyota Sienna CE 3.3 V6 GAS
To reset Oil Replacement Reminder light, turn ignition on and make sure that the ODO/TRIP display screen is in the ODO mode. (Reset procedure will not work in the TRIP mode) Turn ignition to Off position while pressing the ODO/TRIP switch button, turn ignition On. Hold button down through entire reset procedure. The light should illuminate for...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 2003-09 Sienna
Vehicle: 2006 Toyota Sienna Limited 3.3 V6 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp c...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 Toyota Sienna CE 3.3 V6 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 Toyota Sienna XLE 3.3 V6 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 Toyota Sienna Limited 3.3 V6 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Overdrive Lamp ->
Vehicle: 2006 Toyota Sienna LE 3.3 V6 GAS
The "OD Off" lamp will be illuminated when the ignition switch is in the On position and the Overdrive (OD) switch is in the Off position. When the OD switch is placed in the On position, the "OD Off" lamp should go out. If the lamp flashes when the switch is placed in the On position, a fault has been detected by the electronic control system. After diagnosis and repair are c...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Toyota Sienna vehicle.
|
| Access the Complete guide! |
