Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Cadillac SRX car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Cadillac SRX automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2007 Cadillac SRX
- 2007 Cadillac SRX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:A
- 2007 Cadillac SRX 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Tightening Specifications
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi 7.2 -> System Service -> ABS Automated Bleed Procedure -> Brake Fluid Pressure Sensor -> Brake Pressure Modulator Valve (BPMV) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Hydraulic Brake System Bleeding - Manual -> Hydraulic Brake System Bleeding - Pressure -> Traction Control Switch -> Yaw Rate Sensor/Lateral & Longitudinal Accelerometer -> Yaw Rate Sensor/Lateral Accelerometer
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
Brake System Bleed
ABS Automated Bleed Procedure
Before performing the ABS Automated Bleed Procedure, first perform "Manual" or "Pressure" bleed of the base brake system. The automated bleed procedure is recommended when one of the following conditions exist: Base brake system bleeding does not achieve the desired pedal height or feel. Extreme loss of brake fluid has occurred. Air ingestion is suspected in the secondary circuits of the brake modulator assembly.
The ABS automated bleed procedure uses a scan tool to cycle the system solenoid valves and run the pump in order to purge any a...
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Precautions -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> General
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings.
Do not allow any oil or grease on the linings. It is recommended that linings be replaced in sets when worn or damaged.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the disc. If roughness or vibration is encountered during highway operation or if pedal pumping is experienced at low speeds, the disc may have excessive thickness v...
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Wheel Cylinder
Vehicle: 2007 Cadillac SRX 3.6 V6 GAS
Delco Master Cylinder
When performing the following procedures, refer to Fig. noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet to remo...
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Brake System Bleed -> Manual Bleed -> Pressure Bleed
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect and ...
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Cadillac SRX cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> General Service
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, ensure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the brak...
CLICK HERE TO GET FULL ACCESS TO 2007 Cadillac SRX BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
