Auto Parts Search
Cadillac SRX CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Cadillac REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Year
2010 | 2009 | 2008 | 2007 |
2006 | 2005 | 2004 |

A/C & HEATER SERVICE PROCEDURES FOR Cadillac SRX AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported Cadillac SRX cars and light trucks from 1990+
Vacuum & Wiring Diagrams -> Passenger Cars -> Vibe
Vehicle: 2004 Cadillac SRX 4.6 V8 GAS
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR Cadillac SRX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported Cadillac SRX cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Front -> Inspection -> Installation -> Rear -> Removal
Vehicle: 2006 Cadillac SRX 3.6 V6 GAS
Removal
Front
- Siphon brake fluid out of master cylinder until fluid level is approximately 1/3 full, this will prevent fluid overflow when caliper piston is pushed back into its bore.
- Raise and support vehicle, then remove wheels.
- Push piston back into its bore using suitable C-clamp, Fig. .
- Remove brake caliper hose bolt, then two metal gaskets from brake caliper bolt.
- Remove two caliper mounting bolts and lift caliper off of rotor.
Rear
- Siphon brake fluid out of master cylinder until fluid level is approximately 1/3 full, this will prevent fluid overflow when caliper piston is pushed ...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR Cadillac SRX AUTOMOBILES
Fuel filter replacement procedures with corresponding images for most domestic and imported Cadillac SRX cars and light trucks sold in the U.S. for 1980+.
General Motors Corp./Saturn Light Trucks, SUVs & Vans -> Fuel Pressure Relief -> Except Montana SV6, Relay, Rendezvous w/3.6L Engine, Terraza, Tracker & Uplander -> Engine Fuel Pressure Service Port -> Engines Less Fuel Pressure Service Port
Vehicle: 2006 Cadillac SRX 4.6 V8 GAS
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while the vehicle relearns its adaptive strategy.
Engines Less Fuel Pressure ...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Cadillac SRX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported Cadillac SRX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Lefthand -> Righthand
Vehicle: 2010 Cadillac SRX Premium 3.0 V6 GAS
Lefthand
- Raise and support vehicle, then remove lefthand tire and wheel assembly.
- Remove mounting nut and separate outer tie rod from steering knuckles using steering linkage and tie rod puller tool No. J24319-B, or equivalent. Do not loosen tie rod end jam nut.
- Lock wheel hub and bearing from turning by installing suitable drift or punch into brake rotor against caliper mounting bracket.
- Remove and discard wheel drive shaft spindle nut.
- Disconnect wheel speed sensor connector and position wiring harness aside.
- Remove mounting nut and separate upper ball joint ball stud from kn...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR Cadillac SRX AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported Cadillac SRX cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Intermittent & Poor Connections -> Intermittents -> Poor Connections
Vehicle: 2007 Cadillac SRX 4.6 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Refer to Figs. and for diagnostic test procedures.
Clearing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector), and follow manufacturer's instructions.
Intermittent & Poor Connections
Intermittents
Most intermittents are caused by faulty electrical connections or wiring. Inspect for the following:
- Wiring broken inside insulation.
- Poor connection between male and female terminal at c...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Cadillac SRX AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported Cadillac SRX cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Raise and support vehicle.
- Disconnect engine harness electrical connector from alternator.
- Reposition battery positive lead boot.
- Remove attaching nut and positive lead from alternator.
- Remove lower ...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR Cadillac SRX AUTOMOBILES
Cabin air filter locations and replacement procedures with corresponding images for most domestic and imported Cadillac SRX cars and light trucks sold in the U.S. as equipped to the current model year.
Cabin Air Filter Service -> General Motors Corp./Saturn -> 2004-09 SRX
Vehicle: 2006 Cadillac SRX 3.6 V6 GAS
On 2004-07 models, under normal operating conditions the cabin air filter should be replaced every 15,000 miles. In dusty areas change the cabin air filter more often.
On 2008-09 models, under normal operating conditions the cabin air filter should be replaced every 25,000 miles. In dusty areas change the cabin air filter more often.
- Place the wipers in Park position then open hood.
- Remove the wiper arm nuts.
- Remove the upper hood assist rods from ball studs.
- Remove the wiper arms.
- Tilt the hood rearward to access air inlet grille panel, while supporting hood assembly.
- Remove the upp...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR Cadillac SRX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported Cadillac SRX cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> StabiliTrak Control System Warning Lamp ->
Vehicle: 2006 Cadillac SRX 4.6 V8 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warning...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported Cadillac SRX cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Cadillac SRX Performance 3.0 V6 GAS
Lower
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to radiator.
- Loosen hose clamp connecting hose to engine.
- Remove hose from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR Cadillac SRX AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported Cadillac SRX cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Alternator -> Water Pump, Air Conditioning Compressor and Power Steering Pump
Vehicle: 2005 Cadillac SRX 4.6 V8 GAS
Water Pump, Air Conditioning Compressor and Power Steering Pump
- Remove fuel injector sight shield.
- Remove air cleaner outlet duct.
- Remove power steering fluid reservoir mounting nuts and position reservoir aside. It is not required to remove fluid lines.
- Rotate drive belt tensioner clockwise to release drive belt tension.
- Slide drive belt from water pump pulley.
- Slide drive belt out from behind drive belt tensioner.
- Access belt from side of tensioner pulley in loca...
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR Cadillac SRX AUTOMOBILES
Component location diagrams for most Cadillac SRX cars and light trucks sold in the U.S. from 1990+.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR Cadillac SRX AUTOMOBILES
OEM drawn wiring diagrams for most Cadillac SRX cars and light trucks sold in the U.S.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR Cadillac SRX AUTOMOBILES
OEM TSB listings for most Cadillac SRX cars and light trucks sold in the U.S. from 1985+.
Document: STORAGE BIN LID IS AVAILABLE SEPARATELY FROM QUARTER TRIM PANEL ASSEMBLY Vehicle: 2004 Cadillac SRX 4.6 V8 GAS Auto Systems: |
Document: TURN BY TURN WILL NOT CANCEL ROUTE Vehicle: 2007 Cadillac SRX 3.6 V6 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR Cadillac SRX AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Cadillac SRX cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Cadillac SRX cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Cadillac SRX cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Cadillac SRX cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO Cadillac SRX SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |