Auto Parts Search
We have info for following modifications of 2007 Chrysler Pacifica
- 2007 Chrysler Pacifica 3.8 V6 GAS, CID:230, Fuel Injection, Aspiration:230, Engine VIN:, Desg:L
- 2007 Chrysler Pacifica 4.0 V6 GAS, CC:3952, CID:241, Fuel Injection, Aspiration:241, Engine VIN:, Desg:X
- 2007 Chrysler Pacifica Touring 4.0 V6 GAS, CC:3952, CID:241, Fuel Injection, Aspiration:241, Engine VIN:, Desg:X
- 2007 Chrysler Pacifica Limited 4.0 V6 GAS, CC:3952, CID:241, Fuel Injection, Aspiration:241, Engine VIN:, Desg:X
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2007 Chrysler Pacifica 3.8 V6 GAS
- Install a suitable engine support tool.
- Disconnect battery ground cable.
- Remove battery cable nut and battery cable from solenoid stud.
- Disconnect electrical connector from solenoid.
- Remove transmission to starter mounting bolt.
- Support engine and transmission assemblies with a jack stand or suitable equivalent.
- Remove front transmission mount to s...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2007 Chrysler Pacifica Touring 4.0 V6 GAS
- Install a suitable engine support tool.
- Disconnect battery ground cable.
- Remove radiator close out panel.
- Remove radiator core support.
- Remove radiator cooling fan.
- Loosen oil level indicator tube retaining bolt and move oil level indicator tube aside.
- Disconnect front and rear oxygen sensor harness connectors.
- Remove retainers and upper heat shield.
- Remove lower exhaust manifold crossover pipe retaining bolts.
- Remove retaining bolts and left exhaust maniverter.
- Remove battery cable nut and battery cable from solenoid stud.
- Disconnect electrical connector from solenoid.
- Remove transmission...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2007 Chrysler Pacifica Touring 4.0 V6 GAS
- Disconnect battery ground cable. Disconnect negative cable from battery before removing battery output wire (B+ wire) from alternator. Failure to do so can result in injury or damage to electrical system.
- Rotate or lift belt tensioner arm, using a suitable tool to relieve tension from drive belt.
- Remove alternator drive belt.
- Unsnap plastic insulat...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2007 Chrysler Pacifica 3.8 V6 GAS
- Disconnect battery ground cable. Disconnect negative cable from battery before removing battery output wire (B+ wire) from alternator. Failure to do so can result in injury or damage to electrical system.
- Disconnect inlet air temperature sensor.
- Disconnect CCV hose from air cleaner cover.
- Remove air inlet tube to throttle body.
- Remove bolt for air cleaner housing at upper radiator cross member.
- Pull air box up and off over single locating pin.
- Rotate or lift belt tensioner arm, using a suitable tool to relieve tension from drive belt.
- Remove alternator drive belt.
- Remove power stee...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2007 Chrysler Pacifica 4.0 V6 GAS
- Disconnect battery ground cable. Disconnect negative cable from battery before removing battery output wire (B+ wire) from alternator. Failure to do so can result in injury or damage to electrical system.
- Rotate or lift belt tensioner arm, using a suitable tool to relieve tension from drive belt.
- Remove alternator drive belt.
- Unsnap plastic insulat...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Chrysler Pacifica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2007 Chrysler Pacifica cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2007 Chrysler Pacifica 4.0 V6 GAS
- Install a suitable engine support tool.
- Disconnect battery ground cable.
- Remove radiator close out panel.
- Remove radiator core support.
- Remove radiator cooling fan.
- Loosen oil level indicator tube retaining bolt and move oil level indicator tube aside.
- Disconnect front and rear oxygen sensor harness connectors.
- Remove retainers and upper heat shield.
- Remove lower exhaust manifold crossover pipe retaining bolts.
- Remove retaining bolts and left exhaust maniverter.
- Remove battery cable nut and battery cable from solenoid stud.
- Disconnect electrical connector from solenoid.
- Remove transmission...
CLICK HERE TO GET FULL ACCESS TO 2007 Chrysler Pacifica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2007 Chrysler Pacifica vehicle. |
Access the Complete guide! |