Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Nissan Altima car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Nissan Altima automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2007 Nissan Altima
- 2007 Nissan Altima 2.5 L4 GAS, CC:2500, Fuel Injection
- 2007 Nissan Altima S 2.5 L4 GAS, CC:2500, Fuel Injection
- 2007 Nissan Altima SL 3.5 V6 GAS, CC:3498, Fuel Injection
- 2007 Nissan Altima SE 3.5 V6 GAS, CC:3498, Fuel Injection
- 2007 Nissan Altima Hybrid 2.5 L4 ELECTRIC/GAS, CC:2500, Fuel Injection
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2007 Nissan Altima Hybrid 2.5 L4 ELECTRIC/GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Activation -> ID Registration -> Less Activation Tool -> With Activation Tool
Vehicle: 2007 Nissan Altima SE 3.5 V6 GAS
Activation
The activation procedure must be performed after replacing or rotating tire and wheels, replacing tire pressure sensor or BCM.
- Place the ignition switch in the On position.
- With Nissan sensor activation tool J-45295, or equivalent, pushed against the LF sensor, press and hold the activation tool button 5 seconds, Fig.
- The hazard warning lamps will flash as indicated in Fig. .
- Repeat procedure for RF, RR and LR tire pressure sensors.
- When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and sends flashing indicator status by CAN as indica...
CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Activation -> ID Registration -> Less Activation Tool -> With Activation Tool
Vehicle: 2007 Nissan Altima SL 3.5 V6 GAS
Activation
The activation procedure must be performed after replacing or rotating tire and wheels, replacing tire pressure sensor or BCM.
- Place the ignition switch in the On position.
- With Nissan sensor activation tool J-45295, or equivalent, pushed against the LF sensor, press and hold the activation tool button 5 seconds, Fig.
- The hazard warning lamps will flash as indicated in Fig. .
- Repeat procedure for RF, RR and LR tire pressure sensors.
- When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and sends flashing indicator status by CAN as indica...
CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Interpretation -> Less Scan Tool -> With Scan Tool
Vehicle: 2007 Nissan Altima S 2.5 L4 GAS
Less Scan Tool
Accessing Diagnostic Trouble Codes
To start the self-diagnostics, place ignition switch in the On position, then ground terminal of the tire pressure warning check connector. The fault location is indicated by the blinking of the low tire pressure warning lamp, Fig. . If the low tire pressure warning lamp is blinking repeatedly at 5 Hz, there is no fault occurring in the system.
Diagnostic Trouble Code Interpretation
[[table data]]Clearing Diagnostic Trouble Codes
In order to make it easier to find the cause of hard to duplicate malfunctions, the malfunction information is store...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2007 Nissan Altima SE 3.5 V6 GAS
The TPMS (Tire Pressure Monitor System) is controlled by the Body Control Module (BCM). The BCM receives its tire pressure signal from the tire pressure receiver. The tire pressure receiver receives its t...
CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Nissan Altima AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Nissan Altima cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Sensor -> TPMS Receiver
Vehicle: 2007 Nissan Altima S 2.5 L4 GAS
Tire Pressure Sensor
Removal
- Deflate tire, then remove retaining nut an allow transmitter to fall into tire.
- Gently bounce tire so transmitter falls to bottom of tire.
- Place tire on suitable tire changing machine and break both tire beads. Ensure transmitter remains at bottom of tire.
- Turn tire so valve hole is at bottom, then bounce tire so transmitter is near valve hole.
- Lift tire onto turntable and position valve hole 270° from mounting/dismounting head, Fig. .
- Lubricate tire, then remove first side of tire.
- Reach inside of tire and remove transmitter.
- Remove second side of tire...
CLICK HERE TO GET FULL ACCESS TO 2007 Nissan Altima TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2007 Nissan Altima vehicle.
|
| Access the Complete guide! |
