Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Acura TSX car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Acura TSX automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 2004-09 TSX
Vehicle: 2008 Acura TSX 2.4 L4 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D lamp will usually blink and or the MIL will be illuminated. After completing diagnosis and repairs, reset the D and or MIL as follows:
- With ig...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Maintenance Required Lamp -> 2004-09 TSX
Vehicle: 2008 Acura TSX 2.4 L4 GAS
The vehicle must be stopped to reset the maintenance information display.
- Place the ignition switch in the on position. If messages are displayed, press info button to cancel.
- Press and release the SEL/RESET button until Engine Oil Life Indicator is displayed, Fig. .
- Pre...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Information System Display ->
Vehicle: 2008 Acura TSX 2.4 L4 GAS
This system will indicate driver information and service interval reminder information. The system will normally indicate the clock display until the trip function or system check buttons are depressed. When the trip function button is depressed, the system will indicate fuel remaining, trip meter, present fuel consumption and average fuel consumption. When the system check button is depressed, the display will indicate next service interval, engine oil and filter service interval, oil level, coolant level and washer fluid level. A warning lamp on the instrument cluster will be illuminated whe...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Air Bag Warning Lamp ->
Vehicle: 2008 Acura TSX 2.4 L4 GAS
The air bag warning lamp will light for a few seconds when the ignition switch is placed in the on position as a bulb check. I...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Side Air Bag off Lamp ->
Vehicle: 2008 Acura TSX 2.4 L4 GAS
This indicator should light for a few seconds when the ignition switch placed in the on position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Acura TSX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Acura TSX cars and light trucks sold in the U.S. from 1990+.
Acura -> Vehicle Stability Assist (VSA) System Warning Lamp -> 2004-09 TSX
Vehicle: 2008 Acura TSX 2.4 L4 GAS
The VSA warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the activation indicator may come on if the VSA switch has been manually turned O...
CLICK HERE TO GET FULL ACCESS TO 2008 Acura TSX MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Acura TSX vehicle.
|
| Access the Complete guide! |
