Auto Parts Search
We have info for following modifications of 2008 BMW 328XI
- 2008 BMW 328XI 3.0 L6 GAS, CC:2996, Fuel Injection
- 2008 BMW 328XI 3.0 L6 GAS, CC:2996, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Service Indicator Cluster ->
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
The service indicator cluster is used indicate when periodic maintenance is required. The service indicator consists of one yellow, five green and three red Light Emitting Diodes (LEDs), with the inscriptions "Oil Service" and "Inspection." When the ignition switch is turned to the On position, as many as five green LEDs will be illuminated.
The green LEDs will go out when the engine is started. If the yellow LED and one of the inscriptions illuminates with the ignition switch in the On position, and remain on after the engine has started, service the maintenance inscription indicated immediately. ...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2000-09 3 Series Except X3 -> Less iDrive -> Reset -> With iDrive
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
Reset
The reset procedure needs to be performed anytime the tire pressure is adjusted or the tires are rotated.
Less iDrive
- With vehicle in a stationary position, start the engine.
- Touch turn signal lever up or down until tire pressure warning indicator and RESET appear.
- Press button on the end of the turn signal lever to confirm selection of tire pressure indicator.
- Press button on the end of the turn signal lever for approximately five seconds until a check/tick a...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Service Interval Indicator -> 3 Series & M3 -> Interval Indicator -> Less Underhood Diagnostic Connector -> Oil Service -> With Underhood Diagnostic Connector
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
Less Underhood Diagnostic Connector
On these models the SII reset tool cannot be used. Resetting is possible using the instrument cluster trip odometer reset button. Proceed as follows:
- Turn ignition Off.
- Press and hold trip odometer reset button, then turn ignition to "1" (Accessory).
- Keep odometer reset button depressed for approximately five more seconds until any of following words appear in display: "Oil Service" or "Inspection" with "Reset" or "Re."
- On models equipped with high cluster, remaining amount of fuel in liters until next service is displayed should appear.
- On all models, depress ...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Service Indicator Cluster ->
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
The service indicator cluster is used indicate when periodic maintenance is required. The service indicator consists of one yellow, five green and three red Light Emitting Diodes (LEDs), with the inscriptions "Oil Service" and "Inspection." When the ignition switch is turned to the On position, as many as five green LEDs will be illuminated.
The green LEDs will go out when the engine is started. If the yellow LED and one of the inscriptions illuminates with the ignition switch in the On position, and remain on after the engine has started, service the maintenance inscription indicated immediately. ...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Stability Control (ASC, ASC+) & Dynamic Stability Control (DSC) Warning Lamp ->
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the syst...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 BMW 328XI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 BMW 328XI cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Transmission Indicator Lamp ->
Vehicle: 2008 BMW 328XI 3.0 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the system ...
CLICK HERE TO GET FULL ACCESS TO 2008 BMW 328XI MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 BMW 328XI vehicle. |
Access the Complete guide! |