Auto Parts Search
We have info for following modifications of 2008 Chevrolet Equinox
- 2008 Chevrolet Equinox LS 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:F
- 2008 Chevrolet Equinox LT 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:F
- 2008 Chevrolet Equinox LTZ 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:F
- 2008 Chevrolet Equinox Sport 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Chevrolet Equinox AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Chevrolet Equinox cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Chevrolet Equinox Sport 3.6 V6 GAS
- Remove engine splash shield.
- Remove air cleaner assembly.
- Support engine with a suitable engine support fixture.
- Raise and support vehicle.
- Remove three upper engine mount bracket bolts.
- Loosen right upper engine mount bracket upper front bolt.
- Remove ABS connector clip from frame.
- Remove upper engine mount bracket nuts.
- Remove lower engine mount bracket bolts.
- Remove upper engine mount bracket bolt from bracket.
- Remove engine mount and lower bracket from vehicle.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Equinox SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Chevrolet Equinox AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Chevrolet Equinox cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Chevrolet Equinox LTZ 3.4 V6 GAS
- Loosen air cleaner intake duct clamps and remove Positive Crankcase Ventilation (PCV) fresh air pipe.
- Remove air cleaner intake duct from Mass Air Flow (MAF) sensor and throttle body.
- Disconnect MAF sensor electrical connector.
- Remove mounting bolt and air cleaner assembly.
- Relieve belt tension by rotating drive belt tensioner using a suitable serpentine belt tensioner unloader tool.
- Remove belt from righthand idler pulley.
- Release tool and relieve spring tension.
- Remove belt from tensioner.
- If vehicle is not to be raised and supported f...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Equinox SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Chevrolet Equinox AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Chevrolet Equinox cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Chevrolet Equinox LS 3.4 V6 GAS
- Loosen air cleaner intake duct clamps and remove Positive Crankcase Ventilation (PCV) fresh air pipe.
- Remove air cleaner intake duct from Mass Air Flow (MAF) sensor and throttle body.
- Disconnect MAF sensor electrical connector.
- Remove mounting bolt and air cleaner assembly.
- Relieve belt tension by rotating drive belt tensioner using a suitable serpentine belt tensioner unloader tool.
- Remove belt from righthand idler pulley.
- Release tool and relieve spring tension.
- Remove belt from tensioner.
- If vehicle is not to be raised and supported f...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Equinox SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Chevrolet Equinox AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Chevrolet Equinox cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Chevrolet Equinox LT 3.4 V6 GAS
- Loosen air cleaner intake duct clamps and remove Positive Crankcase Ventilation (PCV) fresh air pipe.
- Remove air cleaner intake duct from Mass Air Flow (MAF) sensor and throttle body.
- Disconnect MAF sensor electrical connector.
- Remove mounting bolt and air cleaner assembly.
- Relieve belt tension by rotating drive belt tensioner using a suitable serpentine belt tensioner unloader tool.
- Remove belt from righthand idler pulley.
- Release tool and relieve spring tension.
- Remove belt from tensioner.
- If vehicle is not to be raised and supported f...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Equinox SERPENTINE BELT SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Chevrolet Equinox vehicle. |
Access the Complete guide! |